Toshiba Satellite A300 Maintenance Manual - Page 145
Installing a HDD, HDD holder, screws, HDD assembly
View all Toshiba Satellite A300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Replacement Procedures Installing a HDD The following describes the procedure for installing a HDD (See Figure 4-3 to 4-4). 1. Install a HDD to the HDD holder and secure it with the following screws. • M3.0×3.5F FLAT BIND screw x4 NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for four screws securing the HDD holder. 2. Insert the HDD assembly into the HDD slot and connect it carefully on the system board. 3. Secure the HDD assembly with the following screw. • M2.5×3.0B FLAT BIND screw x2 Satellite A300 Maintenance Manual(960-Q08) 4-16
Replacement Procedures
Satellite A300 Maintenance Manual(960-Q08) 4-16
Installing a HDD
The following describes the procedure for installing a HDD (See Figure 4-3 to 4-4).
1.
Install a HDD to the
HDD holder
and secure it with the following
screws
.
•
M3.0
×
3.5F
FLAT BIND screw
x4
NOTE:
Although they are 3mm head screws, screw torque must be set in 2.5kg-cm
for
four screws securing the HDD holder.
2.
Insert the
HDD assembly
into the HDD slot and connect it carefully on the system
board.
3.
Secure the
HDD assembly
with the following
screw
.
•
M2.5
×
3.0B
FLAT BIND screw
x2