Toshiba Satellite A300 Maintenance Manual - Page 170
CPU, Removing the CPU heat sink
View all Toshiba Satellite A300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Replacement Procedures 4.14 CPU Removing the CPU heat sink The following describes the procedure for removing the CPU heat sink (See Figure 4-27). 1. Disconnect the MB from the connector on the system board Disconnect VGA from the connector 2. Remove the following screws securing the heat sink holder and remove the thermal module • M2.5×5.0 BIND screw x2 • M2.5x 3.0 BIND screw x4 NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse order of the number marked on the holder. 3. Remove the CPU heat sink. Figure 4-27 Removing the CPU heat sink Satellite A300 Maintenance Manual(960-Q08) 39
Replacement Procedures
4.14 CPU
Removing the CPU heat sink
The following describes the procedure for removing the CPU heat sink (See Figure 4-27).
1.
Disconnect the
MB
from the connector on the system board
Disconnect VGA from the connector
2.
Remove the following
screws
securing the heat sink holder and remove the thermal
module
•
M2.5
×
5.0
BIND screw
x2
•
M2.5x 3.0
BIND screw
x4
NOTE:
When removing the heat sink holder, be sure to remove the screws in the reverse
order of the number marked on the holder.
3.
Remove the
CPU
heat sink
.
Figure 4-27 Removing the CPU heat sink
Satellite A300 Maintenance Manual(960-Q08)
39