Toshiba Satellite A300 Maintenance Manual - Page 123
Fingerprint Troubleshooting
View all Toshiba Satellite A300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Troubleshooting Procedures 2.15 Fingerprint Troubleshooting To check if the computer's Fingerprint is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute Fingerprint test in the test program. Refer to Chapter 3, Tests and Diagnostics for more information on how to perform the test program. If any error is detected, perform Procedure 2. Procedure 2 Connector Check and Replacement Check The Fingerprint function is embedded on system board. If Fingerprint malfunctions, its connection is defective or Fingerprint cable and system board may be faulty. Check 1 Make sure Fingerprint cable is firmly connected to the connector CN8 (Santa Rosa). If the problem still occurs, perform Check 2. Check 2 Fingerprint cable may be faulty. Replace it with a new one. If the problem still occurs, perform Check4. Check 3 Fingerprint may be faulty. Replace it with a new one following the steps in Chapter 4. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite A300 Maintenance Manual (960-Q08) 47