Toshiba Satellite A300 Maintenance Manual - Page 160
Cover assembly, Removing the cover assembly
View all Toshiba Satellite A300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Replacement Procedures 4.10 Cover assembly Removing the cover assembly The following describes the procedure for removing the cover assembly (See Figure 4-19 to 4-21). 1. Turn over the computer. 2. Remove the following screws securing the cover assembly from the back and bottom of computer. • M2.0×8.0 FLAT BIND screw Back x9 • M2.5×4.5 FLAT BIND screw Back x9 Figure 4-19 removing the screws (back) 3. Disconnect the touch pad flat cable/Fingerprint cable/Bluetooth Cable from the connector on the system board. Satellite A300 Maintenance Manual(960-Q08) 4-29
Replacement Procedures
4.10 Cover assembly
Removing the cover assembly
The following describes the procedure for removing the cover assembly (See Figure 4-19 to
4-21).
1.
Turn over the computer.
2.
Remove the following
screws
securing the cover assembly from the back and bottom
of computer.
•
M2.0
×
8.0
FLAT BIND screw
Back
x9
•
M2.5
×
4.5
FLAT BIND screw
Back
x9
Figure 4-19 removing the screws (back)
3.
Disconnect the
touch pad flat cable/Fingerprint cable/Bluetooth Cable
from the
connector on the system board.
Satellite A300
Maintenance Manual(960-Q08)
4-29