Toshiba Satellite M105-S3041 User Manual

Toshiba Satellite M105-S3041 Manual



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Toshiba Satellite M105-S3041 manual table of contents:

  • Page 1
    Satellite® M100/M105 Series User's Guide If you need assistance: ❖ ❖ Toshiba's Support Web site pcsupport.toshiba.com Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more ...
  • Page 2
    ... and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed or provided electronically. If you fail to do so, ... data. IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF THE HARD DISK DRIVE OR OTHER STORAGE ...
  • Page 3
    ... for any "critical applications." "Critical applications" means life support systems, medical applications, connections to implanted medical devices, ...energy and, if not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However,...
  • Page 4
    ..., including interference that may cause undesired operation. Contact either: ❖ ❖ Toshiba's Support Web site at pcsupport.toshiba.com. Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) ...
  • Page 5
    ... you to make any changes necessary to maintain uninterrupted service. If Problems Arise If this equipment causes harm to the telephone ..., Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or ...
  • Page 6
    ... information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has ... the appropriate electric inspection authority, or electrician, as appropriate. 2 The user manual of analog equipment must contain the equipment's Ringer ...
  • Page 7
    ... or even lose your network connection. If you should experience any such problem, immediately turn off your Bluetooth or Wireless LAN device. Please contact Toshiba PC product support on Web site http://www.toshibaeurope.com/computers/tnt/bluetooth.htm in Europe or ...
  • Page 8
    ..., or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the ... Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer's instructions as described in the user
  • Page 9
    ... Industry Canada technical specifications were met. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to .... Pour empecher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit etre utilize a l'...
  • Page 10
    ... the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. NOTE The above Caution information applies to products that operate with ...
  • Page 11
    ... above. 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
  • Page 12
    12 2. Indication The indication shown below appears on this equipment. (1) (2) (3) 2.4DSOF4 (4) 1 2 3 4 2.4: This equipment uses a frequency of 2.4 GHz. DS: This equipment uses DS-SS modulation. OF: This equipment uses OFDM modulation. The interference range of this equipment is less than 40m. ...
  • Page 13
    13 The following restrictions apply: ❖ ❖ ❖ Do not disassemble or modify the device. Do not install the embedded wireless module into other device. 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of ...
  • Page 14
    14 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ Belgique: For private usage outside buildings across public grounds over less than 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage ...
  • Page 15
    ... outside of the allowable frequencies as listed above, the user must cease operating the Wireless LAN at that location and consult the local technical support staff responsible for the wireless network. The 5 GHz Turbo mode feature is not allowed for operation in any European Community country. ❖
  • Page 16
    ...Point's radar detection feature will automatically restart operation on a channel free of radar. You may consult with the local technical support staff responsible for the wireless network to ensure the Access Point device(s) are properly configured for European Community operation. ❖ Approved...
  • Page 17
    17 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada USA Austria Denmark Germany Italy Netherlands Portugal UK Belgium Finland Greece Liechtenstein New Zealand Sweden USA Approved Countries/Regions for use for the Intel® PRO/ Wireless LAN 2100...
  • Page 18
    18 Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table. Australia Canada France Hong Kong ...
  • Page 19
    ... these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers... your PC. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers...connection. If you should experience any such problem, immediately turn off either one of ...
  • Page 20
    ...: ❖ ❖ Using the equipment with Bluetooth wireless technology on board airplanes, or In any other environment where the risk of interference to other devices or services is perceived or identified as harmful. If you are uncertain of the policy that applies on the use of wireless devices in a ...
  • Page 21
    ... above. 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
  • Page 22
    22 2. Indication The indication shown below appears on this equipment. (1) (2) (3) 2.4FH1 (4) 1 2 3 4 2.4: This equipment uses a frequency of 2.4 GHz. FH: This equipment uses FH-SS modulation. The interference range of this equipment is less than 10m. This equipment uses a frequency bandwidth ...
  • Page 23
    ...ensure proper use of this product, please read this instruction manual carefully and retain for future ...serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment ...serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment...
  • Page 24
    ..., Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of..., WHETHER BASED ON TORT, CONTRACT OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF....
  • Page 25
    25 Trademarks Satellite is a registered trademark of Toshiba America Information Systems, Inc. and/or Toshiba Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. DirectX, Active Desktop, DirectShow, and Windows Media are...
  • Page 26
    Contents Introduction...34 This guide ...35 Safety icons ...36 Other icons used...37 Other documentation ...37 Service options ...38 Chapter 1: Getting Started...39 Selecting a place to work ...39 Creating a computer-friendly...
  • Page 27
    Contents 27 Using the computer for the first time ...51 Opening the display panel ...51 Your computer's features and specifications ...52 Turning on the power ...52 Adding memory (optional) ...53 Installing a memory module ...54 Removing a memory module...59 Using the TouchPad™...61 Scrolling...
  • Page 28
    28 Contents Chapter 2: Learning the Basics...81 Computing tips ...81 Using the keyboard ...83 Character keys ...83 Making your keyboard emulate a full-size keyboard ...84 Ctrl, Fn, and Alt keys ...84 Function keys...85 Windows special keys...85 Overlay keys ...85 Using the overlay to type numeric...
  • Page 29
    Contents 29 Chapter 3: Mobile Computing...105 Toshiba's energy-saver design...105 Running the computer on battery power ...105 Battery Notice ...106 Power management ...107 Using additional batteries ...107 Charging batteries...108 Charging the main battery...108 Charging the RTC battery...109 ...
  • Page 30
    30 Contents The World Wide Web ...136 Internet Service Providers...136 Connecting to the Internet ...137 Surfing the Internet...137 Internet features...138 Uploading to, and downloading files from, the Internet ...139 Exploring audio features ...139 Recording sounds...139 Using external speakers ...
  • Page 31
    ... reader ...180 Fingerprint reader limitations ...181 Chapter 6: If Something Goes Wrong ...183 Problems that are easy to fix ...183 Problems when you turn on the computer...185 The Windows ® operating system is not working..187 Using Startup options to fix problems ...188 Internet problems ...189
  • Page 32
    ... Resolving hardware conflicts on your own ...191 Fixing a problem with Device Manager ...192 Memory problems... Power and the batteries ...195 Keyboard problems...197 Display problems ...198 Disk drive problems... problems...209 Wireless networking problems...210 DVD operating problems...213 Develop good ...
  • Page 33
    Contents 33 Maintaining security when the battery is not fully charged ...229 Power profile mode ...230 Standby mode...231 Hibernation mode ...232 Display modes ...233 Display brightness ...233 Disabling or enabling the TouchPad ...234 Zooming applications in/out ...234 Keyboard hot keys ...235 ...
  • Page 34
    ... or upon certain reinstallations of the software product(s) or reconfigurations of the computer, and may be completed by Internet or telephone (toll charges may apply). Some software may differ from its retail version (if available), and may not include user manuals or all program functionality. 34
  • Page 35
    Introduction This guide 35 NOTE The product specifications and configuration information are designed for a product Series. Your particular model ...This guide introduces the computer's features. You can: ❖ ❖ ❖ Read the entire guide from beginning to end. Skim through and stop when a topic ...
  • Page 36
    36 Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could ... according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not ...
  • Page 37
    ... the text. Other documentation Your computer comes with the following documentation: ❖ ❖ An electronic version of the user's guide It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba's Web site at ...
  • Page 38
    ... options Toshiba offers a full line of optional service programs to complement its limited warranty. Toshiba's...standard limited warranty, extended warranty, and service upgrade terms and conditions are available ... at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see "If ...
  • Page 39
    Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and ...
  • Page 40
    ...air conditioner vents or heaters. Extreme heat, cold, or humidity. Liquids and corrosive chemicals. ❖ ❖ ❖ Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information...
  • Page 41
    ...3. Remove the battery pack. Failure to follow these instructions could result in serious injury or permanent ... until you have taken the computer to an authorized service center. If you experience discomfort ... to prevent heat injury to skin. Read the enclosed Instruction Manual for Safety and Comfort.
  • Page 42
    42 Getting Started Selecting a place to work Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in its operation. Before you remove a PC Card, always wait for it to cool. You could get burned removing a hot PC Card. Never place a heavy ...
  • Page 43
    Getting Started Setting up your computer 43 Important information on your computer's cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. To prevent possible overheating of...
  • Page 44
    ... windows displayed, and the order in which windows appear, may vary according to your software setup choices. The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software. 1 2 3 4 5 From the welcome screen click Next to enter the Setup Wizard. Confirm ...
  • Page 45
    Getting Started Registering your computer with Toshiba 45 NOTE If you are connecting your computer to a network, consult your system administrator before you choose your computer name and network settings. Follow the remaining screen prompts to complete the setup process. Once you click the ...
  • Page 46
    46 NOTE Getting Started Adding optional external devices Adding optional external devices Before adding external devices or memory, Toshiba recommends setting up your software. See "Setting up your software" on page 44. After starting your computer for the first time you may want to: Add...
  • Page 47
    ... plug from a socket. Always grasp the plug directly. Failure to follow this instruction may damage the cord/cable, and/or result in a ...to the computer, always follow the steps in the exact order as described in the User's Guide. Connecting the power cord/cable to a live electrical outlet should be ...
  • Page 48
    48 1 Getting Started Connecting to a power source To connect AC power to the computer: Connect the power cord/cable to the AC adapter. Sample connecting the power cord/cable to the AC adapter Handling the cord on this product will expose you to lead, a chemical known to the State of California ...
  • Page 49
    ...or electric shock, possibly resulting in serious injury. Never attempt to connect or disconnect a power plug with wet hands. Failure to follow this instruction could result in an electric shock, possibly resulting in serious injury. The computer's main battery light gives you an indication of the...
  • Page 50
    50 Getting Started Charging the main battery Charging the main battery Your computer came with its battery already installed. Before using the battery to power the computer, you must charge the battery. To charge the battery with the computer turned off, leave the computer plugged into an AC ...
  • Page 51
    Getting Started Using the computer for the first time 51 Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel 1 2 Facing the front of the computer, locate the latch on the center of the display panel. Slide the ...
  • Page 52
    ... switches shown on the notebook chassis, unless you have selected all those features. This information applies to all the features and icons described in this guide. Below are examples of some of the many possible icons used on your computer: Sample system icons Turning on the power To turn on the...
  • Page 53
    Getting Started Adding memory (optional) 53 3 Press and hold the power button in until the power button and the on/off light on the system indicator panel glow blue-about one second. Sample turning on the power The preinstalled operating system will load automatically. When you turn on the ...
  • Page 54
    54 Getting Started Adding memory (optional) For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See "Setting up your...
  • Page 55
    Getting Started Adding memory (optional) 55 If the computer is on, begin at step 1; otherwise, skip to step 3. 1 Click Start, then Turn off or Shut Down, depending on the system (for more information, see "Turn Off or Shut Down" on page 70). Click Turn Off or Shut Down. The operating system ...
  • Page 56
    ... into the computer. 9 Remove the new memory module from its antistatic packaging. Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. 10 Insert the memory module into the socket on the underside of the computer.
  • Page 57
    Getting Started Adding memory (optional) 57 Front of computer Sample inserting the memory module into the slot 11 Hold the memory module by its edges so that the gold connector bar faces the slot, at a slight angle to the socket. clip clip Sample inserting the memory module into the socket 12 ...
  • Page 58
    58 Getting Started Adding memory (optional) 13 Gently press down on the memory module connector until the clips snap into place. clip clip Sample pressing down on the memory module Do not force the memory module into position. The memory module should be completely inserted into the socket and...
  • Page 59
    Getting Started Adding memory (optional) 59 You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory module. If you are adding an extra memory module after setting up the computer, verify that the ...
  • Page 60
    60 2 3 Getting Started Adding memory (optional) Pull the clips away from the memory module. The memory module pops up slightly. Gently lift the memory module to a 45 degree angle and slide it out of the slot. Front of computer Sample removing the memory module 4 5 Replace the memory module slot...
  • Page 61
    Getting Started Using the TouchPad™ 61 Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: 1 2 Click Start, Control Panel, Performance and Maintenance, and then System. The General tab view automatically appears ...
  • Page 62
    ... your finger along the bottom edge of the TouchPad. This feature can be disabled or changed in the Mouse Properties dialog box. Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button. To double-click, ...
  • Page 63
    Getting Started Using the TouchPad™ 63 The TouchPad On/Off tab view window appears. Sample TouchPad On/Off screen 5 6 7 Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. 8 9 Close the Printers and Other Hardware window. Close the ...
  • Page 64
    64 Getting Started Using external display devices Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to the available video ports: ❖ ❖ An external monitor or projector via the RGB (monitor) port A standard ...
  • Page 65
    Getting Started Using external display devices 65 2 While holding down Fn, press F5 repeatedly until the setting you want takes effect. Briefly pause between pressing the F5 key to allow time for the display to change. This hot key cycles through the available settings in the following order:...
  • Page 66
    ... resolution of the external display device. The external display device must support a resolution of 800 X 600 or higher. Using an external keyboard If you ... keyboard, you can attach one to your computer. The computer's USB ports support any USBcompatible keyboard. Using a mouse If you prefer to ...
  • Page 67
    ... Read the documentation that came with your printer. Follow the manufacturer's instructions when connecting a local printer. You can connect a ... to your printer documentation for further instructions. TECHNICAL NOTE: To determine if your printer supports Plug and Play, check its documentation. If ...
  • Page 68
    ... a printer Setting up a printer Some printers require a specific installation process. Refer to your printer installation guide for instructions before completing the following procedure. If your printer does not support Plug and Play, follow these ...
  • Page 69
    Getting Started Connecting an optional external diskette drive 69 Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5inch diskettes. Sample optional external USB diskette drive To connect ...
  • Page 70
    70 Getting Started Turning off the computer Turning off the computer Pressing the power button before shutting down the Windows® operating system could cause you to lose your work. Make sure the system indicator panel's disk light and the drive-in-use light are off. If you turn off the power ...
  • Page 71
    Getting Started Turning off the computer 71 turn on the computer again, you will automatically return to where you left off. TECHNICAL NOTE: Before using any of these options to shut down or turn off your computer, save your files and make sure the disk activity lights are off. If you change your...
  • Page 72
    72 Getting Started Turning off the computer Standby mode The Standby command places the computer into a powersaving mode. Standby holds the current state of the computer in system memory (RAM) so that, when you restart the computer, you can continue working from where you left off. Factors to ...
  • Page 73
    Getting Started Turning off the computer 73 1 Click Start, select Turn off computer. The Turn off computer dialog box appears. Sample Turn off computer Windows® dialog box 2 Click Turn Off. The computer shuts down completely. Shut Down For Windows® XP Professional or Windows® XP MCE when ...
  • Page 74
    74 2 3 Getting Started Turning off the computer Click the TOSHIBA Power Management icon. Click on the Setup Action tab. Sample Setup Action settings screen 4 Select the options you want from the drop-down lists. ❖ When I press the power button Set this option to Shut down if you want the ...
  • Page 75
    Getting Started Turning off the computer 75 Restarting your computer To start the computer up again, press the power button until the on/off light glows blue. If you turn off the computer by closing the display panel, you can start it again by opening the display panel. Using and configuring ...
  • Page 76
    76 4 Getting Started Turning off the computer Select Hibernation for the options you want. ❖ When I press the power button Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button. When I close the lid Set this option to Hibernate if you...
  • Page 77
    Getting Started Turning off the computer 77 Sample Turn off computer Windows® dialog box The computer saves the status of all open programs and files, turns off the display, and enters into a low-power mode. The on/off light blinks amber indicating the computer is in Standby mode. Configuring ...
  • Page 78
    78 5 6 NOTE Getting Started Caring for your computer Click Apply. Click OK. For more information about the Power Management utility, see "TOSHIBA Power Management" on page 162. Once the computer is configured, you can place it into Standby mode by either pressing the power button or closing ...
  • Page 79
    Getting Started Caring for your computer 79 Cleaning the computer Keep liquids, including cleaning fluid, out of the computer's keyboard, speaker grille, and other openings. Never spray cleaner directly onto the computer. Never use harsh or caustic chemical products to clean the computer. To ...
  • Page 80
    80 1 Getting Started Caring for your computer Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. 2 3 Pass the locking end through the loop. Insert the cable's locking end into the security lock slot ...
  • Page 81
    Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer's temporary memory until you save it to the disk. If the network you are using goes down ...
  • Page 82
    82 ❖ Learning the Basics Computing tips Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all...
  • Page 83
    Learning the Basics Using the keyboard 83 Using the keyboard Your computer's keyboard contains character keys, control keys, function keys, and special Windows® keys, providing all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is ...
  • Page 84
    84 Learning the Basics Using the keyboard Making your keyboard emulate a full-size keyboard Although your computer's keyboard layout is compatible with a standard full-size keyboard, it has fewer keys. A standard full-size keyboard has two Enter, Ctrl, and Alt keys; editing keys; cursor ...
  • Page 85
    Learning the Basics Using the keyboard 85 Function keys The function keys (not to be confused with the Fn key) are the 12 keys at the top of the keyboard. Sample function keys F1 through F12 are called function keys because they execute programmed functions when pressed. Used in combination ...
  • Page 86
    86 Learning the Basics Using the keyboard Sample numeric and cursor control overlay Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press Fn and F11 simultaneously. The numeric mode light on the ...
  • Page 87
    Learning the Basics Starting a program 87 To disable the numeric overlay, hold down the Fn key and press F11 again. The numeric mode light on the keyboard indicator panel goes out. Using the overlay for cursor control The keys with the gray arrows and symbols on their left front are the cursor ...
  • Page 88
    88 ❖ ❖ Learning the Basics Starting a program Use Windows® Explorer or My Computer to locate the program file Use the Run dialog box The next three sections explain how to start a program from the Start menu, Explorer and the Run dialog box. Starting a program from the Start menu When you ...
  • Page 89
    Learning the Basics Starting a program 89 This example opens WordPad using Windows® Explorer. 1 2 3 4 5 6 Click Start, then point to All Programs. Click Accessories. Click Windows Explorer. Click My Computer to expand the window. In the left part of the window, click the line that ends in ...
  • Page 90
    ....exe, then click OK. If you do not know the location, you can search for it by clicking Start, then Search, and then following the on-screen instructions. HINT: To run the same program again, click the arrow to the right of the text box and select the command line from the drop-down list. ❖
  • Page 91
    Learning the Basics Saving your work 91 Saving your work Before you turn off the computer, save your work on the hard disk drive or diskette/CD. This is one of the most important rules of computing. TECHNICAL NOTE: Save your data even when you are using the Standby command, in case the main ...
  • Page 92
    ... file you are currently working with, choose Save As from the File menu and give the new file a different name. File names The Windows® operating system supports long file names which can contain up to 255 characters and can include spaces. You may use all the letters and numbers on the keyboard ...
  • Page 93
    Learning the Basics Printing your work 93 Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft® Word saves files with a .doc extension. Any file name with an extension ...
  • Page 94
    94 Learning the Basics Backing up your work The program displays a Print dialog box. Sample Print dialog box 3 4 Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Backing up your work Back up all the files you create in case something ...
  • Page 95
    ... the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform. These features include wide-screen movies, multiple language tracks, digital surround sound, ...
  • Page 96
    ... on the right side of the computer. Your CD-RW/DVD-ROM or multi-function drive may look like this: Drive in-use indicator light Eject button Manual eject hole Sample CD-RW/DVD-ROM or multi-function drive Drive in-use indicator light-Indicates when the drive is in use. Eject button-Press to ...
  • Page 97
    ... around it. Doing so could cause the drive to malfunction. Manual eject hole-Use if you need to release... a straightened paper clip or other narrow object to press the manual eject button located inside the hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside ...
  • Page 98
    98 4 Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Grasp the tray and pull it fully open. Sample drive tray fully extended 5 Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in "Caring for CD or DVD Discs" on page...
  • Page 99
    ... on the spindle and is lying flat on the tray. If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. 9 Push the disc tray in by pressing gently on the center of the tray until it clicks into place. You are ready to use the disc. Playing...
  • Page 100
    100 Learning the Basics Using the CD-RW/DVD-ROM or multi-function drive Stop button Play/pause button Sample Windows Media Player screen The Windows Media Player control panel works much like an ordinary compact disc player: ❖ ❖ To play the CD or to pause, click the Play/pause button. To ...
  • Page 101
    ...you insert a CD into the CD-RW/DVD-ROM or multifunction drive and the Auto-Run feature does not automatically start your disc, try launching the CD manually. To do this, follow these steps: 1 2 Open the Start menu and select My Computer. Click the CD-RW/DVD-ROM or multi-function drive icon. The disc...
  • Page 102
    .... Additionally, certain optical media recorded on your optical drive may not playback or operate properly on other PCs or optical media players. These problems are not due to any defect in your Toshiba PC or optical drive. Please refer to your PC's product specification for listing of specific ...
  • Page 103
    ... computer off 1 Insert a slender object, such as a straightened paper clip, into the manual eject hole. The disc tray slides partially out of the drive (about 1 inch). Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and ...
  • Page 104
    104 Learning the Basics Toshiba's online resources Toshiba's online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades. For more ...
  • Page 105
    Chapter 3 Mobile Computing This chapter covers all aspects of using your computer while traveling. Toshiba's energy-saver design Your computer enters a low-power suspension mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other ...
  • Page 106
    106 Mobile Computing Running the computer on battery power Battery Notice Battery life may vary considerably from specifications depending on product model, configuration, applications, power management settings and features utilized, as well as the natural performance variations produced by the ...
  • Page 107
    ... familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba's Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with ...
  • Page 108
    108 Mobile Computing Charging batteries Charging batteries The main battery needs to be charged before you can use it to power the computer. Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Use only battery ...
  • Page 109
    Mobile Computing Charging batteries 109 The main battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 ...
  • Page 110
    110 NOTE Mobile Computing Monitoring main battery power The above error message may vary by computer model. The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer. The RTC battery charges when the computer is powered on. If the RTC ...
  • Page 111
    Mobile Computing Monitoring main battery power ❖ 111 Is unlit when the battery has discharged, the battery is not charging, or the AC adapter is not plugged into the computer or AC outlet. Battery life and charge time may vary, depending upon power management settings, applications and features...
  • Page 112
    112 Mobile Computing Monitoring main battery power Power button On/off light Main battery light Sample power and main battery light locations Determining remaining main battery power NOTE Wait at least 16 seconds after turning on the computer before trying to monitor the remaining battery ...
  • Page 113
    Mobile Computing Monitoring main battery power 113 The TOSHIBA Power Management Properties window appears. Sample TOSHIBA Power Management Properties The remaining battery charge is indicated on the left side of the dialog box. With repeated discharges and recharges, the battery's capacity ...
  • Page 114
    114 Mobile Computing Monitoring main battery power What to do when the main battery runs low When the main battery runs low you can: Plug the computer into an external power source and recharge the main battery Place the computer into Hibernation mode and replace the main battery with a ...
  • Page 115
    Mobile Computing Monitoring main battery power 115 2 3 Click the Setup Action tab. Configure the Alarm settings to suit your needs. Conserving battery power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as: ❖ ❖ How the ...
  • Page 116
    116 Mobile Computing Monitoring main battery power Power Profiles You can choose a predefined Power Profile or select your own combination of power management options. To do this: 1 Click Start, Control Panel, Performance and Maintenance, and then TOSHIBA Power Management. The TOSHIBA Power ...
  • Page 117
    Mobile Computing Monitoring main battery power 117 Using a hot key to set the Power Profile mode You may use a hot key to set the Power Profile mode. To set the Power Profile mode: 1 Press Fn and F2 simultaneously to display the Power Profile mode pop-up window. Sample Power Profile mode pop-up ...
  • Page 118
    118 Mobile Computing Changing the main battery Changing the main battery Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. This could cause serious injury or fire, and could also damage the ...
  • Page 119
    ...Removing the battery from the computer To remove the battery: 1 2 Save your work. Power off the computer or place it in Hibernation mode according to the instructions in "Using and configuring Hibernation mode" on page 75. Unplug and remove any cables connected to the computer, including the AC ...
  • Page 120
    120 6 7 Mobile Computing Changing the main battery Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. Sample removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it ...
  • Page 121
    Mobile Computing Taking care of your battery 121 If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position. Sample inserting the battery 3 4 5 6 Reset the battery lock to the locked position. ...
  • Page 122
    122 ❖ Mobile Computing Taking care of your battery Do not overcharge or reverse charge a battery. Overcharging will shorten its life, and reverse charging could damage it. Avoid touching the metal terminals of the battery with another metal object. Short-circuiting the battery can cause it to ...
  • Page 123
    Mobile Computing Taking care of your battery 123 3 Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light flashes or there is some other warning ...
  • Page 124
    ... so could possibly result in serious injury. Always use the battery pack supplied as an accessory or an equivalent battery pack specified in the User's Manual. Other battery packs have different voltage and terminal polarities. Use of non-conforming battery packs could generate smoke or cause fire ...
  • Page 125
    ... with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information. TECHNICAL NOTE: When traveling by air, you may ...
  • Page 126
    ... its features to start programs, find documents, set up system components, and perform most other computing tasks. HINT: The illustrated examples in this guide may appear slightly different from the screens displayed by your system. The differences are not significant and do not indicate any change ...
  • Page 127
    Exploring Your Computer's Features Exploring the desktop 127 Finding your way around the desktop Your computer's desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Start button ® Taskbar System tray Sample Windows ...
  • Page 128
    128 Exploring Your Computer's Features Exploring the desktop The icons initially displayed on your system desktop include: Recycle Bin - Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette,...
  • Page 129
    ... volume. To activate a specific task, double-click the appropriate System tray icon. Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: ❖ ❖ ❖ A modem (one comes with your computer) A ...
  • Page 130
    ... ways to connect to the Internet in addition to those discussed in this section. For troubleshooting information related to this topic, see "Modem problems" on .... The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem...
  • Page 131
    ...with the modem and displays identifying information reported by the modem. If Windows® cannot communicate with the modem, it displays an error message. Consult the troubleshooting sections of your modem and Windows® documentation. 8 9 Click OK to close the properties dialog box for that specific...
  • Page 132
    ... jack. Sample connecting to a wall jack The modem is designed for use with a standard analog telephone line. Do not connect the modem to a digital telephone line. A digital line will damage the modem. Now you are ready to send a fax or use the modem to connect to an online service or the Internet.
  • Page 133
    Exploring Your Computer's Features Setting up for communications 133 Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports. Accessing a network To access a network: ❖ At the office...
  • Page 134
    ... and click OK. Using Wireless LAN Connectivity NOTE Wireless connectivity and some features may require you to purchase additional software, external hardware or services. Availability of public wireless LAN access points may be limited. Your system may come with an optional wireless LAN module. ...
  • Page 135
    ... light will be lit. For help with common Wi-Fi® networking problems, see "Wireless networking problems" on page 210. An overview ..., under these headings: The Internet The World Wide Web Internet Service Providers Connecting to the Internet Surfing the Internet Internet features Uploading ...
  • Page 136
    ... to a particular network address and send and receive information. Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the ...
  • Page 137
    ... A modem and telephone line, or a LAN connection A Web browser An Internet Service Provider (ISP) account The Microsoft® Web browser Internet Explorer is automatically configured on your system so that when you first start it, it guides you through signing up for a new ISP account, or assists ...
  • Page 138
    ... ISP, you can probably set up an email address at the same time you sign up for the service. ❖ Internet chat rooms A chat room is a Web site that offers a place ...all the messages are placed, like a gigantic bulletin board. ❖ Online shopping Many Web sites offer products and services for sale.
  • Page 139
    Exploring Your Computer's Features Exploring audio features 139 Uploading to, and downloading files from, the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site ...
  • Page 140
    140 Exploring Your Computer's Features Exploring audio features Positioning bar Record Stop Play Skip forward Skip backward Sample Sound Recorder screen 3 4 5 Click the Record button. Speak normally into the microphone. When you have finished recording, click the Stop button. The Sound ...
  • Page 141
    Exploring Your Computer's Features Exploring audio features 141 Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers. ...
  • Page 142
    ...In addition to high speed, the i.LINK® port also supports isochronous data transfer (the delivery of data at ...as video devices. As with USB ports, the i.LINK® port supports both Plug-andPlay (automatic configuration) ... one of these cards. The PC Card slot supports hot swapping, which allows you to ...
  • Page 143
    Exploring Your Computer's Features Using PC Cards 143 Inserting a PC Card Before you insert a PC Card, refer to the documentation that comes with the card to see if you need to do anything before you insert it. To insert a PC Card: 1 2 Locate the PC Card slot on the left side of the computer. ...
  • Page 144
    ...Card, refer to the documentation that came with the card or refer to your operating system manual or online help. Using the Bridge Media Adapter Slot The Bridge Media Adapter Slot supports the use of Memory StickTM or Memory StickTM PRO media, Secure DigitalTM (SDTM) ...
  • Page 145
    Exploring Your Computer's Features Using the Bridge Media Adapter Slot 145 Inserting memory media The following instructions apply to all media devices. 1 2 Turn the media so that the contacts (metal areas) are face down. Push the media into the adapter slot until it locks in place. Sample ...
  • Page 146
    146 Exploring Your Computer's Features Using the Bridge Media Adapter Slot Do not remove memory media while data is being written or read. Even when the Windows message "copying..." disappears, writing to the media might still be in progress and your data could be destroyed. Wait for the ...
  • Page 147
    Chapter 5 Toshiba Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the ...
  • Page 148
    148 ❖ ❖ Toshiba Utilities TOSHIBA Assist CD/DVD Drive Acoustic Silencer Fingerprint Authentication Utility TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following...
  • Page 149
    Toshiba Utilities TOSHIBA Assist 149 The TOSHIBA Assist offers four categories of options: Connect Secure Protect & Fix Optimize Connect The features available in this category are: ConfigFree™ Connectivity Doctor Start Bluetooth® Bluetooth Settings Bluetooth Local COM Settings ...
  • Page 150
    ...password before you can work on your computer again. Toshiba supports several types of passwords on your computer: ❖ An instant... programs and files when leaving the computer temporarily (the user password supports this function). A supervisor password-Prohibits unauthorized users from accessing ...
  • Page 151
    Toshiba Utilities Using a supervisor password 151 To use an instant password, press Fn, then press F1. An instant password has no effect on an optional USB mouse or trackball. To unlock your system, press any key or the pointing device and the Windows Logon screen will appear. Select your user ...
  • Page 152
    152 Toshiba Utilities Using a supervisor password Sample TOSHIBA Assist Security window 3 4 5 6 7 Select the Supervisor Password icon. Click Registered. Type your password in the Supervisor Password box. Retype your password in the Supervisor Password again box. Click OK. Deleting a supervisor ...
  • Page 153
    Toshiba Utilities Using a supervisor password 153 5 6 Type the correct password. Click OK. Setting a user password If you choose to set a user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it. Toshiba is not...
  • Page 154
    ...User Password icon. Select Not Registered. Type the correct password. Click OK. PC Diagnostic Tool Utility This utility can help diagnose problems with devices in your computer. Refer to the online help documentation within the application for additional help. To use the PC Diagnostic Tool utility:...
  • Page 155
    Toshiba Utilities Fn-esse® 155 2 Select the devices that you would like to test by clicking the check box that appears to the left of the device. Click the + (plus) and - (minus) symbols to expand and collapse the categories. NOTE 3 Click Start Diagnostics when you are ready to begin the ...
  • Page 156
    156 Toshiba Utilities Fn-esse® Starting Fn-esse® Click Start, All Programs, Toshiba, Utilities, Fn-esse, or double-click the Hotkey Assignment icon in the Optimize tab of TOSHIBA Assist. The Fn-esse keyboard appears. Sample Fn-esse screen The keys are color-coded as follows: ❖ ❖ ❖ ...
  • Page 157
    ... drag-and-drop to assign a key To assign a key to open a program or document: 1 2 3 4 Start both Fn-esse and Windows® Explorer (or the program supporting drag-and-drop). Resize the Explorer window so that you can see both the Fn-esse keyboard and Explorer at the same time. In the Explorer window, ...
  • Page 158
    158 Toshiba Utilities Fn-esse® The Assignment Type dialog box appears. Sample Fn-esse assignment type dialog box Follow the instructions in "Making a direct key assignment" on page 158 or "Making a popup assignment" on page 158. Making a direct key assignment 1 2 Select Direct to ...
  • Page 159
    Toshiba Utilities Fn-esse® 159 3 To create a popup list with items from various folders, or to pick only a few items from a folder, create a new folder containing only the desired programs and documents. If you are unsure how to do this, refer to your operating system documentation. Click OK to...
  • Page 160
    160 Toshiba Utilities TOSHIBA Hotkey Utility TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [Fn+F3] and Hibernation [Fn+F4]. To activate the Hotkey utility: 1 Click Start, All Programs, Toshiba, ...
  • Page 161
    Toshiba Utilities TOSHIBA SD™ Memory Card Format Utility 161 The SD Memory Card Format screen appears. Sample SD Memory Card Format screen 2 3 Select the drive corresponding to the SD memory card. Select the formatting option: ❖ ❖ Quick Format Full Format 4 5 Click Start to begin ...
  • Page 162
    162 Toshiba Utilities TOSHIBA Power Management TOSHIBA Power Management The TOSHIBA Power Management enables you to control your computer's power usage, regardless of the source, and use the many preset power profiles, or create one yourself. To access TOSHIBA Power Management: ❖ Click Start...
  • Page 163
    Toshiba Utilities TOSHIBA Power Management 163 The profiles shown in the Profile panel consist of the preset power profiles that come with your computer, plus any customized power profiles that you have created. Preset Power Profiles The preset power profiles are: Full Power High Power ...
  • Page 164
    164 1 2 3 Toshiba Utilities Mouse Utility Customizing a power profile Select the profile to be customized in the Profile panel. Make the desired changes to the settings on the Basic Setup tab and the Setup Action tab. Click Apply, then OK. Mouse Utility The Mouse utility allows you to change ...
  • Page 165
    Toshiba Utilities TOSHIBA HW Setup ❖ ❖ ❖ 165 Pointers Pointer options Hardware You may see additional categories depending on your particular pointing device. For information on these settings, see "Using the TouchPad™" on page 61. 2 Adjust the settings as desired, then click OK. ...
  • Page 166
    ... of your battery. Boot Priority-Allows you to change the sequence in which your computer searches the drives for the operating system ❖ You can also manually choose the Boot Priority by pressing the power button, then quickly pressing the F12 key, or the right or left arrow keys. Select the ...
  • Page 167
    Toshiba Utilities TOSHIBA Zooming Utility ❖ ❖ ❖ 167 Keyboard-Allows you to enable or disable the wake-on keyboard function. USB-Allows you to enable or disable USB Legacy Emulation. LAN-Allows you to set networking functions. By changing any of the options that appear in the dialog ...
  • Page 168
    168 Toshiba Utilities TOSHIBA Zooming Utility Sample TOSHIBA Zooming Utility Properties screen 2 3 Select the desired option(s). Click OK. The zoom in and zoom out hot keys will now work with the applications you selected. To zoom in, hold down the Fn key and press 2; to zoom out, hold down the ...
  • Page 169
    Toshiba Utilities TOSHIBA Button Controls 169 TOSHIBA Button Controls The TOSHIBA Button Controls allow you to customize the Toshiba Assist and Toshiba Presentation buttons. Those buttons are located to the left of the keyboard. To access TOSHIBA Button Controls: 1 Double-click the TOSHIBA Button...
  • Page 170
    170 Toshiba Utilities CD/DVD Drive Acoustic Silencer CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to music CDs more enjoyable. NOTE When you change the CD/DVD drive to "Quiet" mode...
  • Page 171
    Toshiba Utilities Fingerprint Authentication Utility 171 Fingerprint Authentication Utility (Available on certain models) The fingerprint authentication utility and fingerprint reader (available on certain models) can be used to replace the keyboard-based user/BIOS password authentication system ...
  • Page 172
    ... improves the security of your software. NOTE If your system supports power-on security, you will need to input a user password. During ... when you are ready. Sensor busy-Wait for the sensor to complete its operation. Problem with operation-The sensor could not read your fingerprint. Swipe your ...
  • Page 173
    ... User Switching feature of Windows® XP is also supported. If user A is logged on and the fingerprint ... and switches users. If your system supports power-on security, existing fingerprint samples ... Settings - Power-on Security. (This wizard is displayed only if your system supports power-on security.)
  • Page 174
    ... enter the Windows® logon password. NOTE Your hardware must support Power-on security to use the single logon feature. You must have ... Allow power-on security single sign-on check box. (Logon support must be enabled for this option to be accessible.) Fingerprint Management Fingerprints are stored ...
  • Page 175
    Toshiba Utilities Fingerprint Authentication Utility 175 Fingerprints ❖ Enroll or Edit Fingerprints-Runs the fingerprint enrollment wizard. You can enroll/delete fingerprints for the current user and, if power-on security is implemented, control whether they are stored in the fingerprint ...
  • Page 176
    ...during Web page or dialog registration. When the window is displayed again, all the data is entered automatically when you scan your fingerprint on the sensor. Registered Web pages can also be accessed directly from the Biomenu. Supported browsers are: ❖ ❖ ❖ Internet Explorer Netscape Firefox
  • Page 177
    Toshiba Utilities Fingerprint Authentication Utility 177 Biomenu Biomenu provides access to the utility's features and settings. It is available in several variants or skins. To view or select other Biomenu skins, open the Control Center and select Settings, User Settings. Swipe your finger to ...
  • Page 178
    178 Toshiba Utilities Fingerprint Authentication Utility Password Bank recognizes pages containing a password field and displays a hint that the page can be registered. These hints can be turned off in the Settings dialog. A wizard will assist you through your first registration. Replaying a ...
  • Page 179
    Toshiba Utilities Fingerprint Authentication Utility 179 Replaying a registered dialog Biomenu can play back a registered dialog for a Web page that you already have open. To replay a registered dialog: 1 2 Display the dialog to be replayed. Use the sensor. If the hint for replaying dialogs is ...
  • Page 180
    ...Select a registration. Click Delete. Care and maintenance of your fingerprint reader Follow these guidelines to avoid damage to the sensor and finger recognition problems. ❖ Do not touch the sensor if you have built-up static electricity. Before you touch the sensor, always touch a metal surface...
  • Page 181
    Toshiba Utilities Fingerprint Authentication Utility ❖ 181 Clean the sensor with a lint-free cloth. Do not use detergent to clean the sensor. Follow the tips below to improve the fingerprint recognition success rate. ❖ ❖ ❖ Enroll two or more fingers. Enroll additional fingers if ...
  • Page 182
    182 Toshiba Utilities Fingerprint Authentication Utility ❖ ❖ ❖ Wet or extremely dry Soiled or oily Weight loss or gain ❖ ❖ Toshiba does not guarantee that this fingerprint recognition technology is error-free. Toshiba does not guarantee that the fingerprint reader will recognize the ...
  • Page 183
    Chapter 6 If Something Goes Wrong Some problems you may encounter when using your ... aims to help you solve many problems by yourself. It covers the problems you are most likely ... You will find information on Toshiba's support services at the end of this chapter. Problems that are easy to fix Your ...
  • Page 184
    184 2 If Something Goes Wrong Problems that are easy to fix Click the Applications tab. If a program has stopped responding, the words "not responding" appear beside its name in the list. 3 Select the program you want to close, then click End Task. Closing the failed program should allow you...
  • Page 185
    If Something Goes Wrong Problems when you turn on the computer 185 To record the details:...manufacturer needs to help you solve your problem. 2 3 4 5 Press Ctrl and c simultaneously to copy ... and refer to it when you contact the software manufacturer. 6 Problems when you turn on the computer These ...
  • Page 186
    186 If Something Goes Wrong Problems when you turn on the computer The computer starts ...conflict. When this happens turning the power on returns you to the problem instead of restarting the system. To clear the condition,.... If you have a hard disk problem, you will not be able to start the computer....
  • Page 187
    ... normal routine. The screen does not look right. Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
  • Page 188
    ... working Using Startup options to fix problems If the operating system fails to start ...€™s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu... most recent settings that worked) Directory Services Restore Mode (Windows® domain controllers...
  • Page 189
    ...® operating system is not working 189 Internet problems My Internet connection is very slow. Many ...Help can assist you in troubleshooting the problem. To access Windows® Help and Support: 1 Click Start, then... need help and follow the on-screen instructions. Click a problem you would like help with ...
  • Page 190
    ...try using Windows® Help and Support to troubleshoot the problem first. For help on hardware conflicts:...and follow the steps. If there is still a problem, the operating system should display a message... of its attached devices is not working, resolving the problem can be time-consuming and frustrating...
  • Page 191
    If Something Goes Wrong Resolving a hardware conflict 191 Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer's Central Processing Unit (CPU). It also needs a direct channel ...
  • Page 192
    ...component and use its resources for the new device. See "Fixing a problem with Device Manager" on page 192. Reconfigure the device... not conflict. Refer to the device's documentation for instructions about changing settings on the device. ❖ Fixing a problem with Device Manager Device Manager...
  • Page 193
    If Something Goes Wrong Resolving a hardware conflict 193 Disabling a device 1 2 3 4 5 Open the Start menu, and click Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. Select the specific device...
  • Page 194
    ... to another. A Troubleshooting button is also present. 6 Click Troubleshoot...A Help and Support window for that device appears. For more information ... off the computer automatically. 3 4 Remove the memory module, following the instructions in "Removing a memory module" on page 59. Reinstall the ...
  • Page 195
    ... high-capacity battery and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adapter or power cord/cable will neither power the computer nor recharge the batteries. Here are some typical problems and how to solve them: The AC power light does not come on ...
  • Page 196
    196 If Something Goes Wrong Resolving a hardware conflict The battery may not be inserted correctly in the computer. Turn off the computer, remove the battery, clean the contacts with a soft dry cloth (if necessary) and replace the battery. See "Removing the battery from the computer" on page...
  • Page 197
    ... see "Charging batteries" on page 108. Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself. The keyboard produces unexpected ... to turn off the numlock light. If the problem occurs when both the keypad overlays are off,...
  • Page 198
    ... keyboard. The computer will restart and recognize the device. Display problems Here are some typical display problems and their solutions: The screen is blank. Display Auto Off may have gone ... simultaneously (once). If this does not correct the problem, press Fn and F5 simultaneously again...
  • Page 199
    ... information see Windows® Help. A message tells you that there is a problem with your display settings and that the adapter type is incorrect... with your hardware. Reduce the size of the color palette to one that is supported by the computer's internal display. To change the display properties: 1 ...
  • Page 200
    ... 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode... access the disk or as sector errors. Sometimes a disk problem may cause one or more files to... have garbage in them. Typical disk problems are: You are having trouble accessing a disk, or one or...
  • Page 201
    If Something Goes Wrong Resolving a hardware conflict 201 Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking: 1 2 3 Click Start, then click My Computer. Right-click the drive ...
  • Page 202
    ... programs run correctly but others do not. This is probably a configuration problem. If a program does not run properly, refer to... diskette, the first diskette (not the drive) is probably causing the problem. Run Error-checking on the faulty diskette (for instructions see "Disk drive problems" on...
  • Page 203
    ...CD-RW/DVD-ROM or multi-function drive problems You cannot access a disc in the drive. Make...narrow object, such as a straightened paper clip, to press the manual eject button. This button is in the small hole next ...DVD-ROM tray. Never use a pencil to press the manual eject button. Pencil lead can break...
  • Page 204
    .... The CD-RW/DVDROM or multi-function drive supports the Digital Versatile Disc (DVD) formats DVD-ROM...), and CD-RW (read-only). If the problem is with a data CD or DVD, refer to the software's documentation ... during installation and setup of new cards. If you are having trouble getting one or more of
  • Page 205
    ... with the PC Card. Some card manufacturers use special software called enablers to support their cards. Enablers result in nonstandard configurations that can cause problems when installing the PC Card. If your system does not have built-in drivers...
  • Page 206
    ... Goes Wrong Resolving a hardware conflict Resolving PC Card problems Here are some common problems...working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict ...has its own I/O base address. See "Fixing a problem with Device Manager" on page 192 for more ...
  • Page 207
    ... or Standby mode. This is known as "warm swapping" and is not supported with this computer. For more information on Hibernation and Standby modes see ... to an external device, check that the connection is secure. Refer to the card's documentation, which should contain a troubleshooting section.
  • Page 208
    ...Goes Wrong Resolving a hardware conflict Printer problems This section lists some of the most common ...Run the printer's self-test to check for any problem with the printer itself. Make sure you... in "Setting up a printer" on page 68 or in the instructions that came with the printer. You may have...
  • Page 209
    If Something Goes Wrong Resolving a hardware conflict 209 Modem problems This section lists common modem problems: The modem will not ...(bits per second) or higher. Refer to the program's documentation and the modem manual for information on how to change these settings. The modem is on, set up ...
  • Page 210
    ... problems This section provides general troubleshooting tips for networking problems, specifically wireless (Wi-Fi) ..., please see Windows Help and Support or contact your computer technician. ❖ If ...browse to a public Web site, the ISP's (Internet Service Provider) service may be disrupted. Verify ...
  • Page 211
    ...error messages- these will be very helpful if you should confer with a support technician at a later time. Verify that the network connection is configured to obtain ... into your computer's RJ45 Ethernet port. If your connection problem disappears, the problem lies in the Wi-Fi part of your network.
  • Page 212
    ... Timed Out" or another error message appears in response, then the problem is probably Wi-Fi-related. ❖ If you have enabled any ....), check the access point vendor's Web site for recent firmware upgrades. Problems with WEP keys, in particular, are frequently addressed in new firmware releases. ...
  • Page 213
    ... not provide enough information to determine if this is the case, contact that vendor's support group for further advice. DVD operating problems If you experience a problem ... several discs and all fail, consider sending your drive to an authorized service provider to get it cleaned.
  • Page 214
    214 5 If Something Goes Wrong DVD operating problems Verify that your computer recognizes your CD-RW/ DVD-ROM or multi-...should appear in the list. 6 See "Checking device properties" on page 193 for instructions on using Device Manager to view the DVDROM properties. Check the Toshiba Web site ...
  • Page 215
    If Something Goes Wrong DVD operating problems 215 4 5 Next to the words Desktop Area, move the slider to a lower ... 640 x 480 or 800 x 600 can cause distortion. To disable Stretch, follow the instructions below: 1 2 3 4 5 Right-click the Desktop, select Properties. Select the Settings tab. Select ...
  • Page 216
    ... software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See "Computing tips" on page 81 for instructions. On a regular basis, back up the information stored on your hard disk. Here are some ways you can do this: ❖ ❖ ❖ Copy files to...
  • Page 217
    ...Get familiar with all the user's guides provided with your computer, as well as the manuals that come with the programs ... you can use to supplement the information in the manuals. Data and system configuration backup ... for later recall. If you experience problems after installing some new hardware ...
  • Page 218
    ...5 If Something Goes Wrong Develop good computing habits Click Help and Support. Under Pick a Task, click Undo changes to your computer with System ... the saved Restore Point. To do this: 1 2 3 4 5 Click Start. Click Help and Support. Under Pick a Task, click Undo changes to your computer with System...
  • Page 219
    ... us, by far the most valuable component of our computer system is the data we have created with it, and stored on its hard disk drive. Since problems with either hardware or software can make the data inaccessible or even destroy it, the next most valuable component of your computer system may be a ...
  • Page 220
    ... e-mail apps. Visit the vendors' Web sites (www.microsoft.com, for example) for detailed instructions. Newsgroup files and settings-for Outlook Express, or other newsgroup readers. Visit the vendors' Web sites for detailed instructions. Other data files. If you do not find an ...
  • Page 221
    ... hold them. Windows XP also includes a Backup utility, though it does not directly support writing to CDs. For more information, click Start, Help and Support, or start the Backup utility by clicking Start, All Programs, Accessories, System Tools, Backup.
  • Page 222
    ... to complete the installation successfully. Always carefully follow the installation instructions that accompany the hardware or software. Restart Windows. Always restart .... This will make it much easier to determine the origin of any new problems. For best results, follow this sequence: ❖ ❖ ❖...
  • Page 223
    ...If you have followed the recommendations in this chapter and are still having problems, you may need additional technical assistance. This ...a program, consult the program's documentation for troubleshooting suggestions. Contact the software company's technical support group for their assistance. ...
  • Page 224
    ... on your choice of media Name and version of the program involved in the problem along with its installation media Information about what you were doing when the problem occurred Exact error messages and when they occurred For technical support, call the Toshiba Global ...
  • Page 225
    If Something Goes Wrong Other Toshiba Internet Web sites 225 Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com computers.toshiba.com accessories.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/...
  • Page 226
    226 If Something Goes Wrong Toshiba's worldwide offices Italy Centro Direzionale Colleoni Palazzo Perseo Via Paracelso 10 20041, Agrate Brianza Milano, Italy Latin America and Caribbean Toshiba America Information Systems 9740 Irvine Blvd. Irvine, California 92618 USA 800-457-7777 (within the ...
  • Page 227
    Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute Fn + This hot key enables/disables volume mute on your computer. When volume...
  • Page 228
    228 Fn + Hot Keys Password security Password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display's content reappear, if no password is set for ...
  • Page 229
    ...password before activating the password feature. To set up a password with a screen saver, go to Windows® help for instructions: 1 2 3 4 Click Start, Help and Support. In the Search field, type password screen saver. Press Enter. Click the Protect your files ...
  • Page 230
    230 Fn + Hot Keys Power profile mode Power profile mode This hot key displays the power profile mode popup window and cycles through the power profile modes. Sample power profile modes The properties of each mode are set in the TOSHIBA Power Management utility. For more information, see "...
  • Page 231
    Hot Keys Standby mode 231 Standby mode Fn + This hot key places the computer into Standby mode. ❖ A message box displays by default to confirm that the computer is entering Standby mode. You can choose not to display this message box. Sample Standby confirmation box ❖ For more information...
  • Page 232
    232 Fn + Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. ❖ If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box. ...
  • Page 233
    Hot Keys Display modes 233 Display modes Fn + This hot key cycles through the power-on display options. The display modes are: Built-in display only Built-in display and external monitor simultaneously External monitor only Built-in display and TV TV only Sample display options window In ...
  • Page 234
    234 Fn + Hot Keys Disabling or enabling the TouchPad Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. For more information on using the TouchPad, see "Disabling or enabling the TouchPad" on page 62. Sample disable and enable TouchPad windows Zooming ...
  • Page 235
    Hot Keys Keyboard hot keys 235 Keyboard hot keys Fn + This hot key informs you when the Wireless antenna on-off switch is in the off position. (No message appears when the Wi-Fi antenna on-off switch is in the on position.) Fn + This hot key turns the cursor control overlay on and off. Fn + ...
  • Page 236
    Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada United Kingdom UL approved CSA approved BS approved Australia...
  • Page 237
    ... and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication ... is used to analyze network connections and fix networking problems with your notebook computer. For more information, see "Connectivity ...
  • Page 238
    238 ❖ Using ConfigFree™ with your Toshiba Computer Getting Started Profile Settings-The Profiles utility lets you switch between network configurations. For more information, see "Profile Settings" on page 248. ConfigFree SUMMIT-The ConfigFree SUMMIT utility is used to connect with ...
  • Page 239
    Using ConfigFree™ with your Toshiba Computer Getting Started 239 When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities. SUMMIT Bluetooth Wireless LAN...
  • Page 240
    ... back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer. The Connectivity Doctor works with...
  • Page 241
    Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ ❖ 241 Location of wireless communication switch (identified with a yellow arrow) Status of wireless communication switch (on or off) Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless ...
  • Page 242
    ... automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the ... be established because the wireless communication switch is turned off, the problem description screen will normally display automatically when you ...
  • Page 243
    Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 243 Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth® devices currently used in the neighborhood, and displays information about them on a virtual map. To search for ...
  • Page 244
    244 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample viewing Wi-Fi devices Creating a new wireless connection NOTE This feature is only supported on systems running Windows XP SP2. To add a new wireless connection to an Access Point: 1 2 Open the Search for Wireless ...
  • Page 245
    Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 245 Sample dragging a device to the Access Point Sample Wireless settings screen 3 Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection list, the system displays ...
  • Page 246
    246 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Creating a detected device wireless connection The following screen shows an example of Bluetooth® devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays ...
  • Page 247
    Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 247 Sample dragging the file to the Bluetooth® device icon To be prompted for the device: 1 Drag and drop the file to the Bluetooth radar icon on the ConfigFree Launcher. Sample dragging the file to the Bluetooth® radar icon ...
  • Page 248
    248 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample selecting Send to Bluetooth® Devices option 2 3 NOTE Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the selected device will occur automatically. Disconnecting from a ...
  • Page 249
    Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 249 If you visit a client company occasionally, for example, you can set up a profile to match that environment and connect to the network. Similarly, users who access networks in the office and at home can set up profiles to ...
  • Page 250
    250 6 7 8 9 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Enter any optional comments, if desired. Click Change Icon and select an icon for this profile. Click the icon at the bottom of the screen to display more capture options. Under Captured Items, select the items you ...
  • Page 251
    Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 251 Sample expanded Add Profile screen NOTE The online help provides real-world examples of setting up profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine...
  • Page 252
    252 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the...
  • Page 253
    Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 253 Sample of users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user's ...
  • Page 254
    254 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of sharing a file with one user ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the ...
  • Page 255
    Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 255 NOTE Participating users must be connected by LAN, wireless LAN, or Bluetooth (PAN). Firewall software may prevent ConfigFree SUMMIT from working. Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: 1 2 Click the icon in ...
  • Page 256
    256 1 2 3 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Drag and drop the file to the Wireless radar icon on the ConfigFree Launcher. Right-click on the file and choose a file recipient. Click Send. An Access Point may not always be available. To find out how to use Quick ...
  • Page 257
    Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 257 To review the current Toshiba Wireless Projector settings and change them if necessary: 1 2 Click the icon in the system tray. Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Settings. The Quick ...
  • Page 258
    258 ❖ ❖ Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities The wireless LAN configuration returns to the settings that were last used before the Quick Connect function was started: If the Toshiba Wireless Projector utility is closed. If you select Toshiba Wireless Projector (...
  • Page 259
    ... feature, only one wireless LAN device can be used. Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears. You can then ...
  • Page 260
    260 1 2 3 4 Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature To use the Semi-Automatic Switch feature: Right-click the icon in the system tray. Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be ...
  • Page 261
    Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user's guide. AC BIOS bps CD CD-ROM CD-RW CMOS COM1 COM2 CPU alternating current basic input/output system bits per second compact disc compact disc ...
  • Page 262
    ... Communications Commission hard disk drive Hypertext Markup Language Institute of Electrical and Electronics Engineers input/output interrupt request Internet service provider local area network liquid crystal display line printer port 1 (parallel port) large-scale integration Musical Instrument ...
  • Page 263
    ... adapter thin film transistor universal serial bus uniform resource locator wide area network World Wide Web Terms These terms may appear in this user's guide. A active-matrix display - A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. ...
  • Page 264
    ... changes per second (not necessarily the same as bits per second). See also bits per second. BIOS (basic input/output system) - Basic instructions, stored in readonly memory (ROM), containing the information the computer needs in order to check hardware and load the operating system when you start...
  • Page 265
    Glossary 265 CD-ROM (compact disc read-only memory) - A form of highcapacity storage that uses laser optics instead of magnetic means for reading data. See also CD. Compare DVD-ROM. central processing unit (CPU) - The chip that functions as the "brain" of the computer. It takes ...
  • Page 266
    266 Glossary CPU cache - A section of very fast memory residing between the CPU and the computer's main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache. cursor - A symbol that indicates the current ...
  • Page 267
    Glossary 267 disk drive - The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads. diskette - A thin, flexible disk in a protective jacket that stores magnetically encoded data. Diskettes can be ...
  • Page 268
    268 Glossary executable file - A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device - A device that connects to a computer to expand its ...
  • Page 269
    Glossary 269 G H ground - A conductor to which all components of an electric circuit are connected. It has a potential of zero (0) volts, is connected to the earth, and is the point of reference for voltages in the circuit. hard disk - A storage device composed of a rigid platter or platters...
  • Page 270
    270 Glossary Internet - The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web. K L keyboard shortcut - A key or combination of keys that you use to perform a task instead of using a pointing device ...
  • Page 271
    Glossary 271 microprocessor - See central processing unit (CPU). MIDI (Musical Instrument Digital Interface) - A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem...
  • Page 272
    ... plug in a cable for connection to a network or a peripheral device. processor - See central processing unit (CPU). program - A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also ...
  • Page 273
    ... in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer's BIOS, which is essential instructions the computer reads when you start it up. See also BIOS, memory. Compare RAM. S select - To highlight or otherwise specify text, data, or ...
  • Page 274
    ... active-matrix display. universal serial bus (USB) - A serial bus that supports a data transfer rate of up to 480 Mbps (480 million bits...computer program designed to perform a narrowly focused operation or solve a specific problem. Utilities are often related to computer system management. W Web ...
  • Page 275
    Glossary 275 World Wide Web (www) - The worldwide network of Web sites linked together over the Internet. A user of the Web can jump from site to site regardless of the location of the computer hosting the site. See also Internet.
  • Page 276
    Index Numerics 101-key keyboard 84 A AC adapter 47 AC power connecting adapter 48 AC power cord/cable connectors 236 accessories memory 53 adding memory 53 adjusting recording quality 140 Alt keys 84 audio .wav files 139 audio features 139 Auto-Run 101 charge indicator light 49, 110 charge not ...
  • Page 277
    Index 277 CD-RW/DVD-ROM or multifunction drive troubleshooting 203 CD-RW/DVD-ROM/multi-function drive problems 203 channels DMA 191 IRQ 191 character keys ...disk drive corrupted/damaged data files 202 missing files/trouble accessing a disk 200 running slow 201 diskette drive ...
  • Page 278
    ... messages device driver conflict 190 general hardware problem 190 non-system disk or disk error 187, 202 problem with display settings/ current settings not working with hardware 199 program ... resolving 192 headphones using 141 Help and Support Windows 189 Hibernation mode 71 configuring 75 ...
  • Page 279
    ...not found 189 Internet Explorer icon 128 Internet Service Providers 136 IRQ (Interrupt Request) 191 ... 235 not working 186 overlay keys 85 troubleshooting 197 Windows special keys 85 keyboard, ... 60 microphone 139 modem determining COM port 130 problem solving 209 resetting port to default settings 130 ...
  • Page 280
    ... modem default 130 not recognized 207 problem solving 204, 206 removing 143 ...Adapter 48 energy-saving features 105 problem solving 195 turning on 52 universal ... 62 printer local, connecting 67 problem solving 208 printing a file 93 problem solving AC power 195 accessing disk drives 186 battery charge ...
  • Page 281
    ...190, 191 high-pitched noise 204 illegal operation 184 Internet bookmarked site not found 189 Internet connection is slow 189 keyboard not responding 186 missing files/trouble accessing a disk 200 modem not receiving or transmitting 209 no sound 204 non-system disk or disk error 187, 202 PC Card 204 ...
  • Page 282
    ...55 setting up a connection 133 sound problem solving 204 sounds recording 139 ... 75 from Standby 78 Startup menu problem solving 188 stored data protection ... tray 129 traveling tips 125 troubleshooting CD-RW/DVD-ROM or multifunction ... 134 Windows Help and Support 189 problem solving 187 Windows desktop...
  • Page 283
    Index 283 Wizards Dial-Up Networking Wizard 133 X xD-Picture Card 144
Toshiba Satellite M105-S3041 Manual