Xerox 2218 Systems Administration Guide - Page 112
Checking Configurations, Click the [Undo] button to cancel any changes made and return to
UPC - 095205233940
View all Xerox 2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Administration Tools 5 ¾ Click the [Apply] button to implement any changes. NOTE: Click the [Undo] button to cancel any changes made and return to the previous values. 6 ¾ Select the [Status] tab and then select [Reboot Machine] to enable the selection to take effect. Checking Configurations Use these instructions to check the configuration settings of the WorkCentre 4118 / FaxCentre 2218. To check the configuration, perform these steps: 1 ¾ Open CentreWare Internet Services (see "Accessing CentreWare Internet Services" on page 10-6). 2 ¾ At the CentreWare Internet Services Home Page for the WorkCentre 4118 / FaxCentre 2218, select the [Properties] tab. 3 ¾ Select the plus symbol [+] to the left of the General Setup folder in the Properties frame. 4 ¾ In the Properties frame, within the General Setup folder, select [Configuration]. The lower pane will show the firmware versions. Click [Print System Data List] to print this report. 5 ¾ In the upper pane, click the link for the settings that you want to check. Page 10-8 Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide