Xerox 2218 Systems Administration Guide - Page 78
IPP, ails in the appropriate boxes.
UPC - 095205233940
View all Xerox 2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Network Installation Using CentreWare Internet Services IPP Use these instructions to setup IPP using CentreWare Internet Services. NOTE: The HTTP settings for the device will have been setup when completing the Enabling CentreWare Internet Services section. To complete the installation of the device, perform these steps: 1 ¾ Open CentreWare Internet Services (see Accessing CentreWare Internet Services on page 7-4). 2 ¾ At the CentreWare Internet Services Home Page for the WorkCentre 4118 / FaxCentre 2218, select the [Properties] tab. 3 ¾ Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, and then select the [+] symbol to the left of the Protocols folder. 4 ¾ Select [IPP]. Select the checkbox to enable IPP. Check the IPP Configuration details are correct. If any of the details are incorrect then enter the required configuration details in the appropriate boxes. 5 ¾ Click the [Apply] button to implement any changes. NOTE: Click the [Undo] button to cancel any changes made and return to the previous values. 6 ¾ Select the [Status] tab and then select [Reboot Machine] to enable the selections to take effect. 7 ¾ Continue with Test Print, see Test Print 8-16. Page 7-18 Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide