Xerox 2218 Systems Administration Guide - Page 72

Network Installation Using CentreWare Internet Services NOTE: Click the [Undo] button to cancel any changes made and return to the previous values. 6 ¾ You can Add or Edit a Trap Destination Address by making the following selections and settings in the Trap Destination Addresses section of the frame: Click the [Add IP Address] button or the [Edit] button to add a new address or amend an existing address. In the IP Address Destination section, enter or amend the IP Address and UDP Port Number. In the Traps section, enter the Trap Community Name and check the boxes corresponding to the required Traps to be Received. ¾ Click the [Apply] button to implement any changes and return to the first screen. NOTE: Click the [Undo] button to cancel any changes made and return to the previous values. 7 ¾ You can Delete a Trap Destination Address from the Trap Destination Addresses section of the frame: Highlight the required Address/Socket or Port and click the [Delete] button. 8 ¾ Click the [Apply] button to implement any changes. NOTE: Click the [Undo] button to cancel any changes made and return to the previous values. 9 ¾ Select the [Status] tab and then select [Reboot Machine] to enable the selections to take effect. Page 7-12 Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide