Xerox 2218 Systems Administration Guide - Page 73
Ssdp, Con Ssdp
UPC - 095205233940
View all Xerox 2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Network Installation Using CentreWare Internet Services SSDP Use these instructions to configure the Simple Service Discovery Protocol (SSDP) using CentreWare Internet Services. Configure SSDP To configure SSDP, perform these steps: 1 ¾ Open CentreWare Internet Services (see Accessing CentreWare Internet Services on page 7-4). 2 ¾ At the CentreWare Internet Services Home Page for the WorkCentre 4118 / FaxCentre 2218, select the [Properties] link. 3 ¾ Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, and then select the [+] symbol to the left of the Protocols folder. 4 ¾ Select [SSDP] and check the Protocol Configuration details are correct. If any of the details are incorrect then enter the correct information. 5 ¾ Make the following selections and settings in the General section of the Protocols frame: Select the checkbox to enable SSDP. Enter the [Time to Live] (1 to 255 hops). 6 ¾ Click the [Apply] button to implement any changes. NOTE: Click the [Undo] button to cancel any changes made and return to the previous values. 7 ¾ Select the [Status] tab and then select [Reboot Machine] to enable the selections to take effect. Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide Page 7-13