Xerox 2218 Systems Administration Guide - Page 21
Manually setting TCP/IP Addresses, Machine Setup, Fax Setup, System Admin Tools, Passcode Protect] - service manual
UPC - 095205233940
View all Xerox 2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Basic Network Installation Manually setting TCP/IP Addresses At the WorkCentre 4118 / FaxCentre 2218, perform these steps: HINT: Xerox CentreWare Internet Services can also be used to configure the WorkCentre 4118 / FaxCentre 2218, refer to the CentreWare Internet Services chapter for instructions. When manually making the TCP/IP settings, you will need to know the following information: ¾ The IP address. ¾ The subnet mask, if required. ¾ The Gateway address, if required ¾ The primary and Secondary DNS address, if required. 1 ¾ Ensure the Ethernet Port has been configured (see "Ethernet Port" on page 2-3). 2 ¾ Press the [Machine Status] button. Machine Setup Fax Setup 3 ¾ Press or until System Admin Tools displays and press [Enter]. ¾ If the System Admin Tools have been passcode protected, type in the password and press [Enter]. 4 ¾ Press or until Network Setup displays and press [Enter]. System Admin Tools [Passcode Protect] System Admin Tools [Network Setup] Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide Page 2-9