Xerox 2218 Systems Administration Guide - Page 83
Installation Procedure
UPC - 095205233940
View all Xerox 2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Local Connection Installation Procedure The following drivers are provided PCL6, PostScript®3TM compatible, Macintosh PPD, Linux, Scan and ControlCentre. You can install many of the drivers that you require at the same time. NOTE: The drivers will be installed to the local port. For network connections, it is recommended that you use the instructions relevant to the specific network requirements. The WorkCentre 4118 / FaxCentre 2218 can be connected directly to the parallel port or USB of a host workstation. A document file can be sent or received from the host workstation via the appropriate port to the WorkCentre 4118 / FaxCentre 2218. There are three stages required to install the WorkCentre 4118 / FaxCentre 2218 on a port on a local workstation: ¾ Install the driver. This requires the appropriate printer driver to be installed on the workstation. ¾ Workstation Setup This requires the workstation to be configured to print to the WorkCentre 4118 / FaxCentre 2218. ¾ Test Print or Scan A print job should be submitted to ensure the WorkCentre 4118 / FaxCentre 2218 has been installed and configured correctly. Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide Page 8-3