Xerox 2218 Systems Administration Guide - Page 67
AppleTalk, Installation Procedure, Con the WorkCentre 4118 / FaxCentre 2218
UPC - 095205233940
View all Xerox 2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Network Installation Using CentreWare Internet Services AppleTalk Use these instructions to install the WorkCentre 4118 / FaxCentre 2218 on an AppleTalk network using CentreWare Internet Services. Installation Procedure There are two stages required to install the device on an AppleTalk network using CentreWare Internet Services: ¾ Configure the WorkCentre 4118 / FaxCentre 2218 This procedure explains how to use CentreWare Internet Services to configure the device. ¾ Test Print A print job should be submitted to ensure the device has been installed and configured correctly. Configure the WorkCentre 4118 / FaxCentre 2218 To complete the installation of the WorkCentre 4118 / FaxCentre 2218, perform these steps: 1 ¾ Open CentreWare Internet Services (see Accessing CentreWare Internet Services on page 7-4). 2 ¾ At the CentreWare Internet Services Home Page for the WorkCentre 4118 / FaxCentre 2218, select the [Properties] tab. 4 ¾ Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, and then select the [+] symbol to the left of the Protocols folder. 5 ¾ In the Properties frame, within the Protocols folder, select [AppleTalk]. 6 ¾ Make the following selections and settings in the AppleTalk Physical Configuration section of the Protocols frame: Select the checkbox to enable AppleTalk. Enter the [Printer Name]. Use a meaningful name, such as the location of the device. Choose the Zone where the printer resides from the drop-down menu. 7 ¾ Click the [Apply] button to implement any changes. Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide Page 7-7