Xerox 2218 Systems Administration Guide - Page 56
Enabling/Disabling Raw TCP/IP Printing
UPC - 095205233940
View all Xerox 2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Advanced TCP/IP Setup Enabling/Disabling Raw TCP/IP Printing This procedure is used to enable or disable the Raw Printing port on the WorkCentre 4118 / FaxCentre 2218. Once the port is enabled, you can change the Raw Printing port number. NOTE: While you can change the port number at which the WorkCentre 4118 / FaxCentre 2218 will accept RAW print jobs, it is recommended that you use the default port, 9100. This is the industry standard. To change Port number see "Using CentreWare Internet Services" on page 7-3. To enable the Raw Printing port, at the WorkCentre 4118 / FaxCentre 2218, perform these steps: 1 ¾ Ensure the basic TCP/IP settings have been made (see "Basic TCP/IP Settings" on page 2-5). 2 ¾ Press the [Machine Status] button. Machine Setup Fax Setup 3 ¾ Press or until System Admin Tools displays and press [Enter]. ¾ If the System Admin Tools have been passcode protected, type in the password and press [Enter]. System Admin Tools [Passcode Protect] Page 6-6 Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide