Xerox 2218 Systems Administration Guide - Page 28
IP NDPS Printing
UPC - 095205233940
View all Xerox 2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
NetWare IP NDPS Printing ¾ Ensure server(s) and NDS are patched to the correct level. ¾ Ensure NDPS 2.0 is installed. ¾ Ensure the latest version of the Xerox NDPS Gateway is installed on the relevant server. ¾ Ensure you have an NDS login with sufficient rights to create objects in the required container. NDPS Printing to the WorkCentre 4118 / FaxCentre 2218 uses IP and LPR printing therefore the Line Printer Daemon must be configured. See "Enabling/Disabling LPR/LPD" on page 6-3. 1 ¾ Create NDPS Printer object: In NDS create a new NDPS Printer object in the appropriate container. - Enter a name and select [Create]. - Choose the appropriate NDPS Manager and select the Novell Printer Gateway. Select [OK]. - You can choose a printer type at this stage if required. Otherwise leave as None. Select [OK]. - On the Configure Port Handler screen select [LPR on IP] and then select [Next]. - Enter the IP Address (or host name if appropriate) of the WorkCentre 4118 / FaxCentre 2218. NOTE: The Printer Name can be left at the default. - Select [Finish]. The new Printer Agent will load on the relevant server. - You can select print drivers at this point if you wish. Select [Continue] and then [OK] to finish. NOTE: The two configurations described above can coexist. 2 ¾ Install the print driver on each workstation (see "Workstation Setup" on page 4-3). Page 3-4 Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide