Xerox 2218 Systems Administration Guide - Page 20
System Admin Tools, Network Setup], Config. Network], TCP/IP], DHCP], User Guide, Network, Setup
UPC - 095205233940
View all Xerox 2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Basic Network Installation 4 ¾ Press or until Network Setup displays and press [Enter]. System Admin Tools [Network Setup] 5 ¾ Press or until Configure Network displays and press [Enter]. Network Setup [Config. Network] 6 ¾ Press or until TCP/IP displays and press [Enter]. You can use DHCP or BOOTP to automatically configure TCP/IP on the machine. 7 ¾ Press or until the required setting method displays and press [Enter]. Config Network [TCP/IP] TCP/IP [DHCP] After a short period of time, the network will allocate the required addresses. 8 Print a System Data sheet to check the addresses (see the User Guide for printing reports). Page 2-8 Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
Page 2-8
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
Basic Network Installation
After a short period of time, the network will allocate the required addresses.
Print a System Data sheet to check the addresses (see the
User Guide
for printing reports).
4
Press
or
until
Network
Setup
displays and press [Enter].
System Admin Tools
[Network Setup]
5
Press
or
until
Configure
Network
displays and press
[Enter].
Network Setup
[Config. Network]
6
Press
or
until
TCP/IP
displays and press [Enter].
You can use DHCP or BOOTP to
automatically configure TCP/IP
on the machine.
Config Network
[TCP/IP]
7
Press
or
until the
required setting method displays
and press [Enter].
TCP/IP
[DHCP]
8