Xerox 2218 Systems Administration Guide - Page 96
Test Print or Scan, Test Print, Test Scan
UPC - 095205233940
View all Xerox 2218 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Local Connection Test Print or Scan To ensure the WorkCentre 4118 / FaxCentre 2218 has been installed correctly a test print or scan should be submitted from the workstation. Test Print Perform the following steps: 1 ¾ Open a document on a client workstation. 2 ¾ Select the device as the printer to which the selected document will be sent. 3 ¾ Print the document on the device and verify that it prints correctly. 4 ¾ Ensure the driver is installed on every workstation that will be sending jobs to the device. 5 ¾ Repeat the test for all workstations that will be sending jobs to the device. 6 ¾ The installation process is now complete. If the test print fails, refer to the Problem Solving chapter for trouble-shooting procedures. Test Scan 1 ¾ Open the TWAIN compliant application used to scan documents. 2 ¾ Place a document in the WorkCentre 4118 / FaxCentre 2218. 3 ¾ Follow the instructions supplied by the scanning application and verify the job scans correctly. If the test scan fails, refer to the Problem Solving chapter for trouble-shooting procedures. Page 8-16 Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide