Xerox 6180N DocuSP Common Controller System Guide - Page 64

Document and backup, Online Help for security

Get Xerox 6180N - Phaser Color Laser Printer PDF manuals and user guides
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Security and Network Setup 4. Reboot and configure xrxusr login environment. Reboot the system. The CDE login prompt window will appear. 5. Choose CDE as the desktop environment. This only needs to be configured at the first login. This will need to be re configured with every DocuSP upgrade. With every boot, the operator will need to log in as xrxusr. This has no other impact on system operation. Document and backup Always document and backup all files that you modify in case some unforeseen problem occurs. Example: #cp / etc/inet/ inetd.conf /etc/inet/ inetd.conf.orig RETURN If, for whatever reason, the DocuSP controller will not boot up after your modifications, you can restore the software to its original configuration by booting to single user mode. This is done by typing boot -s from the ok prompt. You will be prompted for the root password. Upon login as root, you can copy the original files back. If you are unfamiliar with the vi editor, you can use the GUI based Text Editor program. To launch the editor as root user, in a terminal window login as root and enter the following: #/ usr/openwin/bin/textedit RETURN Textedit leaves a backup of the modified file in the same directory. This backup file will have a% after the name. This file can be deleted if you have already backed up the original file. When configure-xdss is run, it logs all of the actions into the / opt/XRXnps/log/ xdss_log.txt. View this file to view options that have been implemented. When you make a manual change to the /etc/inetd.conf file, to avoid rebooting the controller, you can retstart the inetd process. To do this, as root user type: ps -e | grep inetd enter and note the process ID returned. Then, type: kill -HUP #### (where #### denotes the process ID). Online Help for security A great deal of helpful security information can be found in Online Help. Suns security tools and blueprints may be found at: http://www.sun.com/solutions/blueprints/ Other security information, including alerts, may be found at: http://sunsolve.sun.com/pub-cgi/ show.pl?target=security/sec 3-14 System Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
Security and Network Setup
3-14
System Guide
4.
Reboot and configure xrxusr login environment. Reboot
the system. The CDE login prompt window will appear.
5.
Choose CDE as the desktop environment. This only
needs to be configured at the first login. This will need to
be re configured with every DocuSP upgrade. With every
boot, the operator will need to log in as xrxusr. This has no
other impact on system operation.
Document and backup
Always document and backup all files that you modify in case
some unforeseen problem occurs. Example: #cp / etc/inet/
inetd.conf /etc/inet/ inetd.conf.orig RETURN If, for whatever
reason, the DocuSP controller will not boot up after your
modifications, you can restore the software to its original
configuration by booting to single user mode. This is done by
typing boot -s from the ok prompt. You will be prompted for
the root password. Upon login as root, you can copy the
original files back.
If you are unfamiliar with the vi editor, you can use the GUI
based Text Editor program. To launch the editor as root user,
in a terminal window login as root and enter the following: #/
usr/openwin/bin/textedit
RETURN Textedit leaves a backup
of the modified file in the same directory. This backup file will
have a% after the name. This file can be deleted if you have
already backed up the original file.
When configure-xdss is run, it logs all of the actions into the /
opt/XRXnps/log/ xdss_log.txt. View this file to view options
that have been implemented.
When you make a manual change to the /etc/inetd.conf file,
to avoid rebooting the controller, you can retstart the inetd
process. To do this, as root user type: ps -e | grep inetd enter
and note the process ID returned. Then, type: kill -HUP ####
(where #### denotes the process ID).
Online Help for security
A great deal of helpful security information can be found in
Online Help. Suns security tools and blueprints may be found
at:
Other security information, including alerts, may be found at:
http://sunsolve.sun.com/pub-cgi/ show.pl?target=security/sec