Yamaha DTX900 Owner's Manual - Page 111
Other Settings [F5] OTHER, Trigger Input jack as copy source
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Reference Song mode Drum Kit mode Click mode 2. Adjust the "tom1" value of Reject Level From so that the Crash1 sound is not triggered, even if hitting the pad connected to the TOM1 jack. The higher the value, the less likely the Crash1 sound will be accidentally triggered. 3. After finding and setting the appropriate value, store the setting as a User Trigger Setup and turn Input Lock off so that you can play the drum performance. NOTE • If the "tom1" value of the Reject Level From is too large, the Crash1 sound may not be triggered properly when you hit both the Crash1 and Tom1 at the same time. Reference Trigger Mode [TRIGGER] Other Settings [F5] OTHER Naming the Trigger Setup [SF1] NAME You can enter a name of up to 12 characters for the Trigger Setup currently being edited. For detailed instructions on naming, refer to "Basic Operation" on page 15. 1 1 [SF6] LIST When the cursor is located on the Name box, you can call up the Character List by pressing the [SF6] LIST button and enter the name. For detailed instructions on naming, refer to "Basic Operation" on page 15. Copying the Trigger Setup [SF2] COPY From this display, you can copy a Trigger Setup (from a specific Trigger Input jack of a specific Trigger Setup number) to the same or different Trigger Input jack of the same or different Trigger Setup number. For example, if you want to copy the Trigger Setup of the TOM1 jack to TOM4 within the current Trigger Setup, set the copy source to "Current" and "tom1," then set the copy destination to "Current" and "tom5," and execute the Copy operation. The Copy operation can be executed by pressing the [ENTER/STORE] button after making the parameter settings. NOTICE • When the Trigger Setup Copy operation is executed, the destination Trigger Setup will be replaced with the settings of the copy source. NOTICE • When setting the copy destination to "Current" and executing the Copy operation, make sure to store the current Trigger Setup by pressing the [ENTER/STORE] button on another display. This is necessary because the edited Trigger Setup will be lost when selecting a different Trigger Setup or when turning the power off; it also is necessary since the Store operation cannot be performed from the [SF2] COPY display. 1 3 2 4 1 Trigger Setup number as copy source Determines the Trigger Setup number as copy source. "Current" refers to the currently edited Trigger Setup. Settings Current, PRE: 01 - USR: 05 B Trigger Input jack as copy source Determines the Trigger Input jack as copy source. Settings snare - pad15 C Trigger Setup number as copy destination Determines the Trigger Setup number as copy destination. "Current" refers to the currently edited Trigger Setup. Settings Current, USR: 01 - USR: 05 D Trigger Input jack as copy destination Determines the Trigger Input jack as copy destination. Settings snare - pad15 Trigger mode File mode Utility mode Sampling mode Chain mode 111 DTX900 Owner's Manual