Yamaha DTX900 Owner's Manual - Page 141

Reference Song mode Drum Kit mode Setting the End Point by Specifying Tempo, Beat and Measure [SF5] SET END > Explanations here apply to step 5 on page 140. From the display called up via the [SF5] SET END button on the [F3] TRIM display, you can set the tempo, beat (time signature) and measure for the audio data included in the User Voice, resulting that the End Point is automatically determined. If you are satisfied with the result (press [SF1] to audition the result), press the [F6] OK button to return to the original display. If not, manually edit the End Point until you are satisfied. 1 2 3 1 Tempo Determines the tempo of User Voice playback. Setting the value here changes the End Point so that the length between the Start Point and the End Point matches the settings of the Beat (time signature) and Measure. Range 30 - 300 B Beat (Time signature) Determines the time signature of User Voice playback. Setting the value here changes the End Point so that the length between the Start Point and the End Point matches the settings of the Tempo and Measure. Settings 1/4 - 16/4, 1/8 - 16/8, 1/16 - 16/16 C Meas (Measure and beat) Determines the length (measure and beat) of User Voice playback. Setting the value here changes the End Point so that the length between the Start Point and the End Point matches the settings of the Tempo and Beat (time signature). Range Measure: 000 - 032 Beat: 00 - 15 (Varies depending on the Beat setting.) NOTE • The Measure setting here indicates the length between the Start Point and End Point of the audio data included in the User Voice. When you wish to play two measures beginning from the Start Point of the User Voice, set the Measure parameter to "002:00." Reference Sampling Mode [SAMPLING] Click mode Trigger mode File mode Utility mode Sampling mode Chain mode 141 DTX900 Owner's Manual