Yamaha DTX900 Owner's Manual - Page 85

Reference Song mode Drum Kit mode Click mode The second page when the INPUT display is called up: 65 7 The second page when the SOURCE display is called up: 65 7 E VelSensDpt (Velocity Sensitivity Depth) When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines the degree to which the resulting volume of each selected Trigger Input Jack responds to the strength with which you hit the pad. When the SOURCE display is called up, this parameter determines the degree to which the resulting volume of each selected Trigger Input Source responds to the strength with which you hit the pad. The higher the value, the more the volume changes in response to your hitting strength (as shown below). Range 0 - 127 When the VelSensOfs parameter below is set to 64: Depth=127 127 Depth=64 Actual resulting velocity (affecting the tone generator block) Depth=32 Depth=0 0 127 Velocity at which pad is hit F VelSensOfs (Velocity Sensitivity Offset) When the INPUT display is called up, this parameter (for which the value is indicated in the knob icon) determines how the played velocities of each selected Trigger Input Jack affect the actual resulting velocity. When the SOURCE display is called up, this parameter determines how the played velocities of each selected Trigger Input Source affect the actual resulting velocity. This lets you raise or lower all velocities by the same amount-allowing you to automatically compensate for playing too strongly or too softly. If the result is 0 or less, the value is set to 0. If the result is higher than 127, the value is set to 127. Range 0 - 127 Reference Drum Kit Mode [DRUM KIT] When Depth (above) = 64 and Offset = 32 127 Actual resulting velocity (affecting the tone generator) 0 64 127 Velocity at which pad is hit When Depth (above) = 64 and Offset = 96 127 Actual resulting velocity (affecting the tone generator) 0 64 127 Velocity at which pad is hit When Depth (above) = 64 and Offset = 64 127 Actual resulting velocity (affecting the tone generator) 0 64 127 Velocity at which pad is hit G SliderSel (Slider Select) When the INPUT display is called up, this parameter determines the Slider with which you can adjust the volume of each selected Trigger Input Jack. When the SOURCE display is called up, this parameter determines the Slider with which you can adjust the volume of each selected Trigger Input Source. Settings kick, snare, tom, cymbal, hihat, misc Trigger mode File mode Utility mode Sampling mode Chain mode 85 DTX900 Owner's Manual