Yamaha DTX900 Owner's Manual - Page 26
Creating a Song by Using a Computer, Recording Your Performance on the, DTX900 to Computer - cubase
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Setting Up Creating a Song by Using a Computer Recording Your Performance on the DTX900 to Computer NOTE • The acronym DAW (digital audio workstation) refers to music software for recording, editing and mixing audio and MIDI data, such as Cubase. ■ Setting up the DTX900 On the DTX900, you need to set the Local Control parameter to "off" in order to avoid a "double" sound. When MIDI Thru is set to "on" in a DAW/sequencer software on your computer, the note events you play on the DTX900 are transmitted to the computer then returned back to the DTX900, producing a "double" sound, since the tone generator block is receiving performance data (MIDI data) from both the keyboard directly and the computer. To prevent such a situation, you need to separate the keyboard block from the tone generator block of the DTX900. This is why Local Control should be set to "off." 1 Press the [UTILITY] button to enter the Utility mode, then press the [F5] MIDI button followed by the [SF1] SWITCH button. ■ Setting up the DAW on the computer 1 Set MIDI Thru to "on" on the DAW. By setting MIDI Thru to "on," the MIDI data generated by playing the pad and transmitted to the computer will be returned back to the DTX900. As shown in the example below, the MIDI data transmitted from the DTX900 then recorded to the computer via MIDI channel 1 will be returned back from the computer to the DTX900 via MIDI channel 3 according to the setting of the recording track. As a result, the tone generator of the DTX900 will sound the MIDI data generated by playing the pad as MIDI data of channel 3. NOTE • For detailed instructions, refer to the manual of the DAW you are using. USB TO HOST terminal Tone generator block (recognizing MIDI Channel 3 data) Local Control = off Keyboard (output via MIDI Channel 1) DTX900 IN CH1 OUT CH3 Computer (Cubase, etc.) MIDI Through = on 2 Move the cursor to the "LocalCtrl," then set this parameter to "off." 3 Press the [ENTER/STORE] button to store this setting. Song Playback From a Computer Using the DTX900 as a Tone Generator The instructions below show how to use the DTX900 as a MIDI tone generator. In this case, actual MIDI sequence data is to be transmitted from a DAW or sequencer on the computer. ■ Setting up the DAW on the computer 1 Set the MIDI port on the DTX900. 2 Start playback of the MIDI file. 26 DTX900 Owner's Manual