Yamaha DTX900 Owner's Manual - Page 96
MIDI Settings, TG SW Tone Generator Switch
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Reference Drum Kit Mode [DRUM KIT] MIDI Settings [SF3] MIDI From this display, you can perform the MIDI settings called up when the current Drum Kit is selected. According to the settings here, MIDI messages for 16 channels will be transmitted to the internal tone generator or the external MIDI device via MIDI when the current Drum Kit is selected. This display consists of five pages. First page 1 2 1 TG SW (Tone Generator Switch) Determines whether or not the MIDI messages will be transmitted to the internal tone generator when the current Drum Kit is selected. When set to on, selecting the current Drum Kit transmits the MIDI messages for the corresponding channel to the internal tone generator according to the settings at 3 - K. Settings Off, On B MIDI SW (MIDI Switch) Determines whether or not the MIDI messages will be transmitted to the external tone generator via MIDI OUT for each MIDI channel when the current Drum Kit is selected. When set to on, selecting the current Drum Kit transmits the MIDI messages for the corresponding channel to the external tone generator via MIDI OUT according to the settings at 3 - K. Settings Off, On Second page 3 4 5 C TRANSMIT Determines the type of MIDI messages transmitted to the internal tone generator or external MIDI device. When "off" is selected, no MIDI message will be transmitted even if the TG SW and MIDI SW parameters are set to on. When "all" is selected, both Program Change and Control Change messages will be transmitted. When "PC" is selected, only Program Change messages will be transmitted. Settings Off, All, PC D VOLUME Determines the value of the Volume (Control Change number 7) for each MIDI channel. Range 0 - 127 E PAN Determines the value of the Pan (Control Change number 10) for each MIDI channel. Range L63 (far left) - C (center) - R63 (far right) 96 DTX900 Owner's Manual Third page 6 7 F VCE NUM (Voice Number) Determines the Program Change number for each MIDI channel. Settings 1 - 128 G BANK MSB/LSB Determines the Program Change number (by Bank MSB/LSB values) for each MIDI channel. Settings 0 - 127 NOTE • For details about the Bank MSB, Bank LSB and Program Change messages and how they determine the Voice of the DTX900, refer to the Voice List in the separate Data List booklet. Fourth page 8 9 H REV SEND (Reverb Send) Determines the value of the Reverb Send Level (Control Change number 91) for each MIDI channel. Range 0 - 127 I CHO SEND (Chorus Send) Determines the value of the Chorus Send Level (Control Change number 93) for each MIDI channel. Range 0 - 127 Fifth page J K J CC NUM Determines the Control Change number for each MIDI channel. Settings Off, 1 - 95 K CC VALUE Determines the value of the specified Control Change number for each MIDI channel. Range 0 - 127 NOTE • If you set a Control change event JK that duplicates the VOLUME 4, PAN 5, REV SEND 8, or CHO SEND 9 setting, the Control Change event JK will take priority.