Yamaha DTX900 Owner's Manual - Page 125

Count Settings 21 Reference Utility Mode [UTILITY] [SF3] COUNT Other Settings 21 [SF5] OTHER 34 Reference Song mode Drum Kit mode Click mode Trigger mode File mode 1 Play Count Enables or disables a two-measure lead-in click count before actual song playback, after you press the [>/■] button. Settings off, on B RecCount Enables or disables a two-measure lead-in click count before actual song recording, after you press the [>/■] button. Settings off, on Initial Settings Called Up When Turning the Power On [SF4] STARTUP From this display, you can set the Drum Kit number, Song number and Trigger Setup number called up automatically every time you turn the power on. 531 24 1 Drum Kit Bank Determines the Drum Kit Bank that is called up automatically every time you turn the power on. Settings PRE, USR, EXT-A - EXT-P B Drum Kit No Determines the Drum Kit number of the Drum Kit Bank specified above that is called up automatically every time you turn the power on. Range 01 - 50 (01 - 99 when EXT is selected) C Song Bank Determines the Song Bank that is called up automatically every time you turn the power on. Settings PRE, USR, EXT D Song No Determines the Song number of the Bank specified above that is called up automatically every time you turn the power on. Range 01 - 99 E Trigger No Determines the Trigger Setup number that is called up automatically every time you turn the power on. Settings PRE: 01 - USR: 05 1 AutoLoad Determines whether the Auto Load function is on or off. When this is on, the instrument will automatically load the files in the AUTOLOAD directory (from the USB storage device) to User memory - whenever the power is turned on. When you use the Auto Load function, you must put the files of "AllData," "Utility," "Click," "AllTrigger," "AllKit," "AllChain," "AllSong," and "AllVoice" in the AUTOLOAD directory. You can put only one file for each type in the AUTOLOAD directory. When an "AllData" file exists in the AUTOLOAD directory, only the "AllData" file will be loaded, and other files will not be loaded. Settings off, on B LED Display Determines the information which is indicated on the LED display. When "KitNo" is selected, the current Drum Kit number is indicated on the LED display. When "tempo" is selected, the current tempo value is indicated on the LED display. When "mode" is selected, the program number of the current mode (Drum Kit number in the Drum Kit mode, Song number in the Song mode, Trigger Setup number in the Trigger mode, Step number in the Chain mode and User Voice number in the Sampling mode) is indicated on the LED display. Settings kitNo., tempo, mode C Tempo Link When this parameter is set to "kit/song," changing the Drum Kit or Song will change the tempo value according to the setting of the new Drum Kit or Song. When this parameter is set to "off," changing the Drum Kit or Song will maintain the tempo value even if the new Drum Kit or Song has the tempo value setting. Normally, set this to "kit/song." Settings off, kit/song D IndivOutAssign Determines the specific outputs for each part. off: Each part will be output according to the OutputSel parameter called up via [DRUM KIT] → [VOICE] → [OUTTUNE]. 6paraOut/8paraOut: Each part will be output as follows. Output Jack indiv1 indiv2 indiv3 indiv4 indiv5 indiv6 OUTPUT L/MONO OUTPUT R Part 6paraOut 8paraOut KICK SNARE TOM (Left) TOM (Right) CYMBAL/HI-HAT/ MISC (Left) HI-HAT CYMBAL/HI-HAT/ MISC (Right) MISC - CYMBAL (Left) - CYMBAL (Right) Settings off, 6paraOut, 8paraOut NOTE • If you select a setting other than "off," Normal voices on MIDI chan- nels other than channel 10 will be output to the OUTPUT L/MONO and R connectors as well as the PHONES jack. 125 DTX900 Owner's Manual Utility mode Sampling mode Chain mode