Yamaha DTX900 Owner's Manual - Page 55

Saving the Created Data to a USB Storage Device, Move the cursor to the TYPE parameter

Get Yamaha DTX900 PDF manuals and user guides
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Quick Guide Quick Guide Saving the Created Data to a USB Storage Device Saving the Created Data to a USB Storage Device The Save operation can be done via various methods, such as saving all data as a single file or saving a specified type of data (e.g., only Drum Kits) as a single file. This section describes instructions on saving all the data you created in each mode of the DTX900 to a USB storage device as a single file. After connecting the USB storage device, follow the instructions below. 1 Press the [FILE] button to enter the File mode. 2 Press the [F1] SAVE button to call up the Save display. 3 Move the cursor to the TYPE parameter, then set the File type to "AllData" by using the data dial or the [INC/YES] and [DEC/NO] buttons. 4 Move the cursor to the file name input location, then input a file name. For detailed instructions on naming, refer to page 15 in the Basic Operation section. You can call up a convenient character list for easier name entry by pressing the [SF6] button. 5 Press the Cursor [M] button to move the cursor to the file/direc- tory select box, then select a destination directory. This step is necessary if you have created a directory as destination on the USB storage device. This is step is not necessary if you want to save the file to the root directory. NOTE • If you want to call up a sub direc- tory, move the cursor to the desired directory then press the [ENTER/STORE] button. 6 Press the [SF1] EXEC to execute the Save operation. If you are about to overwrite an existing file, the display prompts you for confirmation. Press the [INC/YES] button to execute the Save operation to overwrite the existing file, or press the [DEC/NO] button to cancel it, then enter the file name again. After the data has been saved, a "Completed" message appears and operation returns to the original display. NOTICE While the data is being saved, make sure to follow these precautions: • Never remove or eject the media from the device (USB storage). • Never unplug or disconnect any of the devices. • Never turn off the power of the DTX900 or the relevant devices. 55 DTX900 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
Saving the Created Data to a USB Storage Device
Quick Guide
Quick Guide
DTX900 Owner’s Manual
55
Saving the Created Data to a USB Storage Device
The Save operation can be done via various methods, such as saving all data as a single file or saving a specified type of data
(e.g., only Drum Kits) as a single file. This section describes instructions on saving all the data you created in each mode of
the DTX900 to a USB storage device as a single file.
After connecting the USB storage device, follow the instructions below.
1
Press the [FILE] button to enter the File mode.
2
Press the [F1] SAVE button to call up the Save display.
3
Move the cursor to the TYPE parameter, then set the File type to
“AllData” by using the data dial or the [INC/YES] and [DEC/NO]
buttons.
4
Move the cursor to the file name input location, then input a file
name.
For detailed instructions on naming, refer to page 15 in the Basic Operation section.
You can call up a convenient character list for easier name entry by pressing the
[SF6] button.
5
Press the Cursor [
M
] button to move the cursor to the file/direc-
tory select box, then select a destination directory.
This step is necessary if you have created a directory as destination on the USB stor-
age device. This is step is not necessary if you want to save the file to the root direc-
tory.
6
Press the [SF1] EXEC to execute the Save operation.
If you are about to overwrite an existing file, the display prompts you for confirma-
tion. Press the [INC/YES] button to execute the Save operation to overwrite the exist-
ing file, or press the [DEC/NO] button to cancel it, then enter the file name again.
After the data has been saved, a “Completed” message appears and operation returns
to the original display.
NOTE
•
If you want to call up a sub direc-
tory, move the cursor to the
desired directory then press the
[ENTER/STORE] button.
While the data is being saved, make sure to follow these precautions:
•
Never remove or eject the media from the device (USB storage).
•
Never unplug or disconnect any of the devices.
•
Never turn off the power of the DTX900 or the relevant devices.
NOTICE