Yamaha DTX900 Owner's Manual - Page 127
Effect Settings [F3] EFFECT, SHAPE, FREQ Frequency, Q frequency bandwidth, SF5] BYPASS
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Reference Utility Mode [UTILITY] Reference Song mode Drum Kit mode Click mode Trigger mode Effect Settings [F3] EFFECT Among the entire Effect system (page 68) of the DTX900, the parameters related to the Master EQ and Master Effect can be set in the Utility mode. NOTE • For details about the Effect structure of the DTX900, see page 68. Master EQ Settings [SF1] MEQ From this display you can apply five-band equalization to the entire sound of the DTX900. 1 2 3 4 Gain + 5 Q (frequency bandwidth) 0 Frequency - 5 bands Low Lo-Mid Mid Hi-Mid High 1 SHAPE Determines whether the equalizer type used is Shelving or Peaking. The Peaking type attenuates/boosts the signal at the specified Frequency setting, whereas the Shelving type attenuates/boosts the signal at frequencies above or below the specified Frequency setting. This parameter is available only for the LOW and HIGH frequency bands. Settings shelv (Shelving type), peak (Peaking type) ● shelv (Shelving type) This type of EQ shape lets you attenuate/boost the signal at frequencies above or below the specified Frequency setting. EQ Low + Gain Frequency EQ High Gain + Frequency 0 0 - - Frequency Frequency ● peak (Peaking type) This type of EQ shape lets you attenuate/boost the signal at the specified Frequency setting. + Gain Frequency 0 Frequency - B FREQ (Frequency) Determines the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting. Range See below. LOW When the Shape is set to "shelv": 32Hz - 2.0kHz When the Shape is set to "peak": 63Hz - 2.0kHz LOWMID, MID, HIGHMID 100Hz - 10kHz HIGH 500Hz - 16kHz C GAIN Determines the level gain for the Frequency (set above), or the amount the selected frequency band is attenuated or boosted. Range -12 dB - +0 dB - +12 dB D Q (frequency bandwidth) This varies the signal level at the Frequency setting to create various frequency curve characteristics. The higher the setting, the smaller the Q (Bandwidth). The lower the setting, the greater the Q (Bandwidth). Range 0.1 - 12.0 + 0.1 12.0 0 Frequency - Frequency E [SF5] BYPASS Pressing this button toggles the bypass status of the Master EQ between on and off. When Bypass is turned off (BYPASS is shown with white text in black), the Master EQ will be applied to the entire sound of the DTX900. When Bypass is turned on (BYPASS is shown with black text in white), the Master EQ will be bypassed for the entire sound of the DTX900. 127 DTX900 Owner's Manual File mode Utility mode Sampling mode Chain mode