Yamaha DTX900 Owner's Manual - Page 15
Inputting Characters Naming, etc., Using the character list
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Basic Operation Inputting Characters (Naming, etc.) As shown below, you can set the name by repeating the two operations - moving the cursor to the desired location by using the Cursor buttons and then selecting a character by using the data dial, [INC/YES] button, and [DEC/NO] button. Move the cursor to the desired location in the name ■ Using the character list If you find it difficult to select the desired characters with the above method, you may want to use the following method - selecting the characters directly from a list. When the cursor is located at the Name, this [LIST] icon appears and you can call up the Character List display by holding the [SF6] button. Release the [SF6] button to return back to the original display. Perform the operations below while holding the [SF6] button. Move the cursor to the desired location. Select a character at the cursor location Select a character for the cursor location in the name. 15 DTX900 Owner's Manual