Yamaha DTX900 Owner's Manual - Page 119
Loading a Specific Voice From an, All Data or All Voice File, Loading WAV or AIFF Audio Files
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Reference File Mode [FILE] Reference Song mode Drum Kit mode Loading a Specific Voice From an "All Data" or "All Voice" File You can also load a single, specific Voice from the file (File extension: .T3A or .T3V) to the desired User Voice number. 1 Press the [FILE] button to enter the File mode, then press the [F2] LOAD button to call up the Load display. 2 Move the cursor to TYPE, then set the File type to "Voice." Only available files according to the Type are listed in the Directory/File list box on the display. 3 Move the cursor to the Directory/File list box, then select the file to be loaded. You can select any of the files listed in the Directory/File list box on the display. 4 Press the [ENTER/STORE] button so that the Voices included in the selected file are shown in the Directory/File list box. Empty Voices (having no audio signal) are not listed in the Directory/File list box. Loading WAV or AIFF Audio Files to Create a User Voice Any audio data created and edited on a computer and saved in the WAV or AIFF format can also be used as material for a User Voice on the DTX900. After connect a USB storage device containing the desired WAV/AIFF audio files then follow the instructions below. IMPORTANT If you are loading audio WAV/AIFF files, make sure that DIMM modules must be installed to the instrument. For details on installing DIMMs, see pages 76 and 147. 1 Press the [FILE] button to enter the File mode, then press the [F2] LOAD button to call up the Load display. 2 Move the cursor to TYPE, then set the File type to "Wave." Only available files according to the Type are listed in the Directory/File list box on the display. 3 Move the cursor to the Directory/File list box, then select the file to be loaded. You can select any of the files listed in the Directory/File list box on the display. Click mode Trigger mode File mode Utility mode Sampling mode Chain mode 5 Move the cursor to the desired Voice as Load source then press the [SF1] EXEC button. The Voice number and name for the Load destination appear on the left half of the display. 4 After selecting the file, press the [SF1] EXEC button. The User Voice bank, number and name as Load destination appear on the left half of the display. 5 Select the User Voice bank and number as Load destination. 6 Select the User Voice bank and number for the Load destination. 7 Press the [SF1] EXEC button again to exe- cute the Load operation. 6 Press the [SF1] EXEC button again to exe- cute the Load operation. NOTE • The WAV/AIFF file can be loaded is only 16bit (sample size). • An error message appears when you try to load an unavailable file. 119 DTX900 Owner's Manual