Yamaha DTX900 Owner's Manual - Page 34
Tap Tempo
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Quick Guide Tap Tempo With the Tap Tempo Function, you can set the Song or click's tempo by manually tapping in the tempo on a pad. This lets you set whatever tempo you desire for playing or practicing. The Audition button can also be used to set the tempo instead of tapping on a pad. 1 Press the [CLICK] button to enter the Click mode. 2 Press the [F3] TAP button to call up the Tap display. 1 1 TEMPO Indicates the tempo value. Settings 030 - 300 3 Tap on the pad at the tempo in which you want to play (or use the Audition button). You can hit any of the pads. The tempo is detected from the timing at which you hit the pad, and is shown in the LED display and indicated as a TEMPO value in the LCD display. The Tempo value in the LED display will be replaced with the Drum Kit number in a few seconds after performing the Tap with the initial default status when shipped from the factory. Tempo value NOTE • When the PadFunc parameter (page 126) is set to "tap tempo" in the display called up via [UTILITY] → [F2] PAD → [SF2] PADFUNC, the pad specified as source in this display can be used for the Tap Tempo function even if any display other than the Click Tap display is shown. • When MIDI Sync ([UTILITY] → [F5] MIDI → [SF2] SYNC → MIDI Sync) is set to "MIDI," "MIDI" is displayed as the TEMPO value and the Tap Tempo function is not available. 4 Press the [CLICK ON/OFF] button to hear your newly set tempo. The tempo value will be applied to Song playback and Click playback immediately if you change the tempo during playback. 34 DTX900 Owner's Manual