Yamaha DTX900 Owner's Manual - Page 17
DTX950K, Setting up with Acoustic Drums, PCY135, KP125W, XP120SD, RHH135 - outputs
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Setting Up ■ DTX950K * First, connect the RHH135's [PAD] output jack to the 9HI- HAT jack on the DTX900, then connect the RHH135's [HI-HAT CONTROL] output jack to the HI-HAT CONTROL jack on the DTX900. to 7CRASH1 PCY135 PCY155 to 2TOM1 to 3TOM2 to 6RIDE to 9HI-HAT to HI-HAT CONTROL XP100T XP100T PCY135 to 8CRASH2 DTX900 RHH135 XP120SD KP125W XP120T XP120T to 4TOM3 to 1SNARE to JKICK/K to 5TOM4 * Foot pedal is not included in the Special Set. DTX900 Attaching the module stand Attach the included module stand to the DTX900 using the module stand fastening screws. * Be sure to use the included screws. Module stand (included) Module stand fastening screws x 4 (included) ■ Setting up with Acoustic Drums The DTX900 can be played from an acoustic drum kit if the kit is fitted with an optional set of drum triggers (such as Yamaha DT20 Drum Triggers) and the triggers are properly connected to the input jacks of the DTX900. 17 DTX900 Owner's Manual