Yamaha DTX900 Owner's Manual - Page 88
Programming the Stack From an, External MIDI Keyboard, On the DTX900, set the MIDI IN/OUT
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Reference Drum Kit Mode [DRUM KIT] 4 Move the cursor down again and set the VCE NUM, BANK MSB and BANK LSB, which determine the Voice program number. For a complete list of available Voices, refer to the Data List booklet. 3 On the DTX900, set the MIDI IN/OUT parameter to enable MIDI operation. From the display called up via the [UTILITY] → [F5] MIDI → [SF3] OTHER, set the MIDI IN/OUT parameter to MIDI. 4 Call up the Stack/Alternate display again by pressing the [F3] STK/ALT button. 5 Call up the Stack/Alternate display again by pressing the [F3] STK/ALT button. 6 Create the program as illustrated above. Enter the appropriate values shown in the Example Program illustration at the top of this section, using the [INC/YES], [DEC/NO] buttons and data dial. (You can also enter the notes directly from a MIDI keyboard; see "Programming the Stack from an external MIDI keyboard" below.) 7 Try out the newly created Stack/Alternate program by hitting the pad as many times as the step number. 5 Press the [SF5] CHORD button to call up the Chord display. This display is used for receiving MIDI note events from an external MIDI device and applying them to the current Stack/ Alternate program. 6 Set the Step number by using the data dial, [INC/DEC] and [DEC/NO] buttons. 7 Play the MIDI keyboard. The notes you play on the MIDI keyboard (along with the corresponding MIDI channel) appear in the display. 8 Store the settings as a User Drum Kit by pressing the [ENTER/STORE] button. Programming the Stack From an External MIDI Keyboard [SF5] CHORD You can enter note events from an external MIDI keyboard connected to the MIDI IN connector of the DTX900. This conveniently lets you play the chords and notes and directly enter them to the Stack program. 1 Connect one end of the MIDI cable to the MIDI OUT connector of the MIDI keyboard and the other to the MIDI IN connector of the DTX900. 8 Press the [F6] OK button to actually apply the received notes to the current Stack/ Alternate program. If you do not want to apply the received notes to the program, press the [F5] CANCEL button to go back to the original display. 9 Repeat steps 6 - 8 as desired. 10 Store the settings as a User Drum Kit by pressing the [ENTER/STORE] button. 2 On the MIDI keyboard, make the appropri- ate settings so that the MIDI connector is active. If the MIDI keyboard is equipped with a USB TO HOST terminal, you may need to manually enable MIDI operation, depending on the MIDI parameter settings of your keyboard. For details, refer to the Owner's Manual of the MIDI keyboard. 88 DTX900 Owner's Manual