Yamaha DTX900 Owner's Manual - Page 124
Utility Mode [UTILITY], Basic Procedure in the Utility Mode, General Settings [F1] GENERAL
UPC - 086792939285
View all Yamaha DTX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Reference Utility Mode [UTILITY] This chapter explains the Utility mode called up via the [UTILITY] button. In the Utility mode, you can set parameters that apply to the entire system of the DTX900. Basic Procedure in the Utility Mode 1 Press the [UTILITY] button to enter the Utility mode. 3 Move the cursor to each parameter, then set the value by using the data dial, or the [INC/YES] and [DEC/NO] buttons. 2 Note the tab menus (corresponding to the [F1] - [F6] and [SF1] - [SF5] buttons) to find the desired function, then press the relevant button to call up the desired display. 4 After setting, press the [ENTER/STORE] button to store the Utility settings. NOTICE • All Utility settings will be lost if the power is turned off without stor- ing. General Settings [F1] GENERAL Tone Generator Settings [SF1] TG From this display, you can make overall settings for the internal tone generator. The settings here only affect the internal tone generator block. The MIDI output will not be affected. 1 23 Output Gain Settings of the Output Jacks [SF2] OUTGAIN From this display, you can set the output gain for individual Output jacks. The higher the value, the louder the actual volume of the sound output via the specified Output jack. 21 1 Volume Determines the overall volume for the tone generator. The lower the value, the lower the actual volume will be when setting the slider on the front panel to maximum. Settings 0 - 127 B Pan Depth Determines the pan depth (the left and right stereo spread), maintaining the current pan balance between various parts. Settings 1 - 127 C Tune Determines the fine tuning of the overall sound. You can adjust the tuning in cent increments. Settings -102.4 - 0 - +102.3 1 L&RGain Determines the output gain of the OUTPUT L/MONO, R and PHONES jacks. Settings 0dB, +6dB B IndivOutGain Determines the output gain of the INDIVIDUAL OUTPUT jacks. The setting here is applied to all the INDIVIDUAL OUTPUT jacks. Settings 0dB, +6dB 124 DTX900 Owner's Manual