ZyXEL N4100 User Guide - Page 197
Open System, Shared Key, Preamble, Short Preamble, Dynamic Preamble, Preamble Type
View all ZyXEL N4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Chapter 25 Wireless LAN Table 48 ADVANCED > WIRELESS (continued) LABEL DESCRIPTION Authentication mode There are two types of WEP authentication namely, Open System and Shared Key. Open system is implemented for ease-of-use and when security is not an issue. The wireless client and the AP or peer computer do not share a secret key. Thus the wireless clients can associate with any AP or peer computer and listen to any transmitted data that is not encrypted. Shared key mode involves a shared secret key to authenticate the wireless client to the AP or peer computer. This requires you to enable the wireless LAN security and use same settings on both the wireless client and the AP or peer computer. Select Shared Key to have the N4100 authenticate only those wireless clients that use Shared Key mode and have the correct WEP key. Select Open System to have the N4100 allow association with wireless clients that use Open System mode. Data transfer is encrypted as long as the wireless client has the correct WEP key for encryption. Beacon Interval RTS Threshold Fragmentation Threshold Preamble Type Select Both to have the N4100 allow association with wireless clients that use Open System mode. Data transfer is encrypted as long as the wireless client has the correct WEP key for encryption. The N4100 authenticates wireless clients using Shared Key mode that have the correct WEP key. Set the number of milliseconds that should pass between sending out a beacon. Enter a time period between 20 and 999. The default is 100. Enter a value between 1 and 2347 to enable an RTS/CTS handshake to avoid retransmitting due to hidden nodes. Enter a value between 256 and 2346 to enable a fragmentation threshold. This sets the maximum size of data fragments that can be sent. Use a low setting if there is a great deal of radio interference. Preamble is used to signal that data is coming to the receiver. Short preamble increases performance as less time sending preamble means more time for sending data. All IEEE 802.11b compliant wireless devices support long preamble, but not all support short preamble. Default Apply Select Long Preamble if you are unsure what preamble mode the wireless clients support, and to provide more reliable communications in busy wireless networks. Select Short Preamble if you are sure the wireless clients support it, and to provide more efficient communications. Select Dynamic Preamble to have the N4100 automatically use short preamble when wireless clients support it, otherwise the N4100 uses long preamble. Click this button to load the factory default wireless LAN settings. Click this button to save your changes back to the N4100. N4100 User's Guide 197