ZyXEL N4100 User Guide - Page 63
System Setup, 4.1 Overview, 4.1.1 What You Can Do in this What You Need to Know
View all ZyXEL N4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
CHAPTER 4 System Setup 4.1 Overview This chapter describes the System setup screen. 4.1.1 What You Can Do in this Chapter Use the System screen (Section 4.2 on page 64) to configure administrative and system-related general settings for your N4100. You can also use this screen to change your N4100's time and date based on your local time zone. 4.1.2 What You Need to Know The following terms and concepts may help as you read through this chapter. System Name The System Name is for identification purposes. However, because some ISPs check this name you should enter your computer's "Computer Name". Find the system name of your Windows computer by following one of the steps below. • In Windows 2000, click Start > Settings > Control Panel and then doubleclick System. Click the Network Identification tab and then the Properties button. Note the entry for the Computer name field and enter it as the System Name. • In Windows XP, click Start > My Computer > View system information and then click the Computer Name tab. Note the entry in the Full computer name field and enter it as the N4100 System Name. Domain Name This is a network address that identifies the owner of a network connection. For example, in the network address "www.zyxel.com/support/files", the domain name is "www.zyxel.com". The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this blank, the domain name obtained by a DHCP server is used. While N4100 User's Guide 63