ZyXEL N4100 User Guide - Page 86
The Static DHCP Table Screen
View all ZyXEL N4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Chapter 6 Server Table 9 ADVANCED > SERVER LABEL DESCRIPTION DHCP Server IP Address If you select DHCP Relay, enter the IP address of a DHCP server (on the WAN). DHCP Server (Default) Select this option to set the N4100 to assign network information (IP address, DNS information etc.) to Ethernet device(s) connected to the LAN port(s). This is the default setting. IP Pool Starting Address Enter the first of the continuous addresses in the IP address pool. DHCP Pool This field specifies the size or count of the IP address pool. Enter a Size number not greater than 1024. Lease Time Specify the time (in minutes between 1 and 71582788) a DHCP client is allowed to use an assigned IP address. When the lease time expires, the DHCP client is given a new, unused IP address. Primary/ Secondary DNS Server Enter the IP address of the DNS server(s) in the Primary DNS IP Address and/or Secondary DNS IP Address fields. Note: You must specify a DNS server. E-mail Server Redirect IP Address or Specify the IP address or the domain name of the e-mail server to which Domain Name the N4100 forwards e-mail. SMTP Port Enter the port number (25, or between 2500 and 2599) for the mail server. The default is 25. Apply Click Apply to save your changes back to the N4100. 6.3 The Static DHCP Table Screen This table allows you to assign IP addresses on the LAN to specific individual computers based on their MAC Addresses. Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. 86 N4100 User's Guide