ZyXEL N4100 User Guide - Page 75
DHCP Client, Static IP, 0.0.0, PPPoE, Max Idle Time, Redial Period - default username password
View all ZyXEL N4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter 5 WAN/LAN Table 8 ADVANCED > WAN/LAN LABEL DESCRIPTION Wan Port Maximum Transmission Unit Enter the MTU (Maximum Transfer Unit) size for the WAN interface when you select DHCP Client or Static IP. WAN Port Mode DHCP Client Select this option to set the N4100 to act as a DHCP client on the WAN. The N4100 obtains TCP/IP information (IP address, DNS server information, etc.) from a DHCP server. This is the default setting. Static IP Select this option to set the N4100 to use a static (or fixed) IP address. IP Address Enter the static IP address in dotted decimal notation. Subnet Mask Enter the subnet mask in dotted decimal notation. Gateway IP address Enter the IP address of the default gateway device. The gateway is a router or switch on the same network segment as the N4100. The gateway helps forward packets to their destinations. Leave this field as 0.0.0.0 if you do not know it. Primary/ Secondary DNS Server Enter the IP addresses of the primary and/or secondary DNS servers. PPPoE Select this option to activate PPPoE support. Refer to Section 5.3 on page 76 for more information. Username Enter the user name exactly as your ISP assigned. If assigned a name in the form user@domain where domain identifies a service name, then enter both components exactly as given. Password Enter the password associated with the user name above. PPP MTU Setting Enter the MTU (Maximum Transfer Unit) size for PPPoE traffic. TCP MSS Setting Enter the MSS (Maximum Segment Size) size. Service Name Enter the name of your PPPoE service. Connect on Select this option when you don't want the connection up all the time and Demand specify an idle timeout in the Max Idle Time field. This is the default setting with an idle timeout of 10 minutes. Keep Alive Select this option when you want the Internet connection up all the time and specify a redial period in the Redial Period field. When disconnected, the N4100 will attempt to bring up the connection after the redial period. PPTP Select this option to activate PPTP support. Refer to Section 5.3 on page 76 for more information. My IP Address Enter the IP address assigned to you. My Subnet Enter the subnet mask assigned to you. Mask Gateway IP Enter the IP address of the gateway device. address N4100 User's Guide 75