ZyXEL N4100 User Guide - Page 36
Configuring the N4100 Wireless Network Settings, SYSTEM STATUS > SYSTEM, System, Quick View - user manual
View all ZyXEL N4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 3 Tutorials Thomas has to configure the wireless network settings on the N4100. Then users can set up a wireless network using manual configuration (Section 3.2.2 on page 37). 3.2.1 Configuring the N4100 Wireless Network Settings This example uses the following parameters to set up a wireless network. SSID Security Mode Pre-Shared Key 802.11 Mode SSID_Example WPA-PSK DoNotStealMyWirelessNetwork IEEE 802.11b/g/n (Mixed) Follow the steps below to configure the wireless settings on the N4100. Note: To see the current SSID, go to the SYSTEM STATUS > SYSTEM or the System Quick View screen. 1 Open the ADVANCED > WIRELESS screen in the N4100's web configurator. Configure the screen using the provided parameters (see page 36). 2 Make sure Enable is selected in the Wireless Connection field. 3 Enter "SSID_Example" as the ESSID and select a channel which is not used by another AP. 36 N4100 User's Guide