ZyXEL N4100 User Guide - Page 85
ADVANCED > SERVER, Server, N4100 User's Guide - router default password
View all ZyXEL N4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 6 Server The following table describes the labels in this screen. Table 9 ADVANCED > SERVER LABEL DESCRIPTION Web Server HTTP Port Select this radio button if you want to access the N4100 using unsecured HTTP. Specify the port number of the embedded web server on the N4100 for accessing the web configurator. The default port number is 80. Changing the port number helps protect the N4100's web configurator from hacker attacks. Enter a number between 8010 and 8060 to access the web configurator behind a NAT-enabled network. HTTPS Port If you enter a number between 8010 and 8060, you need to append the port number to the WAN or LAN port IP address to access the web configurator. For example, if you enter "8010" as the web server port number, then you must enter "http://192.168.1.1:8010" where 192.168.1.1 is the WAN or LAN port IP address. Select this radio button if you want to access the N4100 using secure HTTPS. Secure Socket Layer (SSL) security allows you to create secure connections between the N4100 and the management computer(s). Refer to Chapter 31 on page 243 for more information. Specify the port number of the embedded web server on the N4100 for accessing the web configurator. The default port number is 443. Changing the port number helps protect the N4100's web configurator from hacker attacks. Enter a number between 4430 and 4440 to access the web configurator behind a NAT-enabled network. Administrator Idle-Timeout DHCP Server DHCP Disable DHCP Relay If you enter a number between 4430 and 4440, you need to append the port number to the WAN or LAN port IP address to access the web configurator. For example, if you enter "4430" as the web server port number, then you must enter "https://192.168.1.1:4430" where 192.168.1.1 is the WAN or LAN port IP address. Type how many minutes a management session can be left idle before the session times out. The default is 5 minutes. After it times out you have to log in with your password again. Very long idle timeouts may have security risks. A value of "0" means a management session never times out, no matter how long it has been left idle (not recommended). Select the DHCP mode on the LAN. Select this option to disable DHCP server on the LAN. Use this if you have a DHCP server (either a computer or another router) and you want that DHCP server to also assign network information (IP address, DNS information etc.) to the devices that connect to the N4100. Select this option to set the N4100 to forward network configuration requests to a DHCP server. Then configure the DHCP Server IP Address field. N4100 User's Guide 85