ZyXEL NBG-417N User Guide - Page 158
Table 67, LABEL, DESCRIPTION, AP Mode, General
View all ZyXEL NBG-417N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Chapter 21 Sys OP Mode If you select Access Point the following pop-up message window appears. Figure 114 Maintenance > Sys Op Mode > General: AP • In AP Mode all Ethernet ports have the same IP address. • All ports on the rear panel of the device are LAN ports, including the port labeled WAN. There is no WAN port. • The DHCP server on your device is disabled. In AP mode there must be a device with a DHCP server on your network such as a router or gateway which can allocate IP addresses. The IP address of the device on the local network is set to 192.168.1.2. The following table describes the labels in the General screen. Table 67 Maintenance > Sys OP Mode > General LABEL DESCRIPTION System Operation Mode Router Select Router if your device routes traffic between a local network and another network such as the Internet. This mode offers services such as a firewall or content filter. Access Point Select Access Point if your device bridges traffic between clients on the same network. Apply Click Apply to save your settings. Reset Click Reset to return your settings to the default (Router) Note: If you select the incorrect System Operation Mode you cannot connect to the Internet. 158 NBG-417N User's Guide