Home » ZyXEL Manuals » Networking » ZyXEL NBG-417N » Manual Viewer

ZyXEL NBG-417N User Guide - Page 73

Quality of Service (QoS) Screen

Get ZyXEL NBG-417N PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

Chapter 6 Wireless LAN Table 30 Network > Wireless LAN > Advanced LABEL Fragmentation Threshold DESCRIPTION The threshold (number of bytes) for the fragmentation boundary for directed messages. It is the maximum data fragment size that can be sent. Enter an even number between 256 and 2346. Beacon Interval DTIM Preamble CTS Protection This field is not available when Super Mode is selected. When a wirelessly networked device sends a beacon, it includes with it a beacon interval. This specifies the time period before the device sends the beacon again. The interval tells receiving devices on the network how long they can wait in lowpower mode before waking up to handle the beacon. This value can be set from 20ms to 1000ms. A high value helps save current consumption of the access point. Delivery Traffic Indication Message (DTIM) is the time period after which broadcast and multicast packets are transmitted to mobile clients in the Active Power Management mode. A high DTIM value can cause clients to lose connectivity with the network. This value can be set from 1 to 100. A preamble affects the timing in your wireless network. There are two preamble modes: long and short. If a device uses a different preamble mode than the NBG417N does, it cannot communicate with the NBG-417N. When set to None, the NBG-417N protects wireless communication against interference. When set to Always, the NBG-417N improves performance within mixed wireless modes. Tx Power Enable IntraBSS Traffic Select Auto to let the NBG-417N determine whether to turn this feature on or off in the current environment. This field controls the transmission power of the NBG-417N. When using the NBG417N with a notebook computer, select a lower transmission power level when you are close to the AP in order to conserve battery power. A Basic Service Set (BSS) exists when all communications between wireless clients or between a wireless client and a wired network client go through one access point (AP). Apply Reset Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless client A and B can access the wired network and communicate with each other. When Intra-BSS is disabled, wireless client A and B can still access the wired network but cannot communicate with each other. Click Apply to save your changes back to the NBG-417N. Click Reset to reload the previous configuration for this screen. 6.7 Quality of Service (QoS) Screen The QoS screen allows you to automatically give a service (such as e-mail, VoIP or FTP) a priority level. NBG-417N User's Guide 73

Section	Page
NBG-417N	1
Table of Contents	5
User’s Guide	13
Getting to Know Your NBG-417N	15
1.1 Overview	15
1.2 Applications	15
1.3 Ways to Manage the NBG-417N	16
1.4 Good Habits for Managing the NBG-417N	16
1.5 LEDs	16
1.6 The WPS Button	17
1.7 Wall Mounting	18
Introducing the Web Configurator	19
2.1 Overview	19
2.2 Accessing the Web Configurator	19
2.3 Resetting the NBG-417N	21
2.3.1 Procedure to Use the Reset Button	21
2.4 Navigating the Web Configurator	21
2.5 Status Screen (Router Mode)	21
2.5.1 Navigation Panel	24
2.5.2 Summary: DHCP Table	25
2.5.3 Summary: Packet Statistics	26
2.5.4 Summary: WLAN Station Status	27
Connection Wizard	29
3.1 Wizard Setup	29
3.2 Connection Wizard: STEP 1: System Information	30
3.2.1 System Name	30
3.2.2 Domain Name	30
3.3 Connection Wizard: STEP 2: Wireless LAN	31
3.3.1 Extend (WPA-PSK or WPA2-PSK) Security	32
3.4 Connection Wizard: STEP 3: Internet Configuration	33
3.4.1 Ethernet Connection	34
3.4.2 PPPoE Connection	34
3.4.3 PPTP Connection	35
3.4.4 Your IP Address	36
3.4.5 WAN IP Address Assignment	37
3.4.6 IP Address and Subnet Mask	37
3.4.7 DNS Server Address Assignment	38
3.4.8 WAN IP and DNS Server Address Assignment	38
3.4.9 WAN MAC Address	39
3.5 Connection Wizard Complete	41
AP Mode	43
4.1 Overview	43
4.2 Setting your NBG-417N to AP Mode	43
4.3 Status Screen (AP Mode)	44
4.3.1 Navigation Panel	46
4.4 Configuring Your Settings	47
4.4.1 LAN Settings	47
4.4.2 WLAN and Maintenance Settings	48
4.5 Logging in to the Web Configurator in AP Mode	48
Tutorials	49
5.1 Overview	49
5.2 How to Connect to the Internet from an AP	49
5.2.1 Configure Wireless Security Using WPS on both your NBG-417N and Wireless Client	49
5.2.2 Enable and Configure Wireless Security without WPS on your NBG- 417N	53
5.3 Bandwidth Management for your Network	56
5.3.1 Configuring Bandwidth Management by Application	56
5.3.2 Configuring Bandwidth Management by Custom Application	57
5.3.3 Configuring Bandwidth Allocation by IP or IP Range	58
Technical Reference	61
Wireless LAN	63
6.1 Overview	63
6.2 What You Can Do	63
6.3 What You Should Know	64
6.3.1 Wireless Security Overview	64
6.4 General Wireless LAN Screen	66
6.4.1 No Security	68
6.4.2 WEP Encryption	68
6.4.3 WPA-PSK/WPA2-PSK	70
6.5 MAC Filter	71
6.6 Wireless LAN Advanced Screen	72
6.7 Quality of Service (QoS) Screen	73
6.7.1 Application Priority Configuration	75
6.8 WPS Screen	77
6.9 WPS Station Screen	77
6.10 Scheduling Screen	79
6.11 WDS Screen	79
6.11.1 Security Mode: Static WEP	81
6.11.2 Security Mode: WPA-PSK/WPA2-PSK	82
WAN	85
7.1 Overview	85
7.2 What You Can Do	85
7.3 What You Need To Know	85
7.3.1 Configuring Your Internet Connection	86
7.3.2 Multicast	87
7.3.3 NetBIOS over TCP/IP	87
7.3.4 Auto-Bridge	88
7.4 Internet Connection	88
7.4.1 Ethernet Encapsulation	88
7.4.2 PPPoE Encapsulation	90
7.4.3 PPTP Encapsulation	92
7.5 Advanced WAN Screen	94
LAN	97
8.1 Overview	97
8.2 What You Can Do	97
8.3 What You Need To Know	98
8.3.1 IP Pool Setup	98
8.3.2 LAN TCP/IP	98
8.4 LAN IP Screen	99
DHCP Server	101
9.1 Overview	101
9.2 What You Can Do	101
9.3 What You Need To Know	101
9.4 General Screen	102
9.5 Advanced Screen	102
9.6 Client List Screen	104
Network Address Translation (NAT)	107
10.1 Overview	107
10.2 What You Can Do	107
10.3 General NAT Screen	108
10.4 NAT Application Screen	108
10.5 NAT Advanced Screen	111
10.5.1 Trigger Port Forwarding Example	112
10.5.2 Two Points To Remember About Trigger Ports	112
Dynamic DNS	115
11.1 Overview	115
11.2 Dynamic DNS Screen	115
Firewall	117
12.1 Overview	117
12.2 What You Can Do	117
12.3 What You Need To Know	118
12.3.1 About the NBG-417N Firewall	118
12.4 General Firewall Screen	118
12.5 Services Screen	119
Content Filtering	121
13.1 Overview	121
13.2 What You Can Do	121
13.3 What You Need To Know	121
13.3.1 Content Filtering Profiles	121
13.4 Filter Screen	122
13.5 Technical Reference	123
13.5.1 Customizing Keyword Blocking URL Checking	123
Static Route	125
14.1 Overview	125
14.2 What You Can Do	125
14.3 IP Static Route Screen	126
14.3.1 Static Route Setup Screen	127
Bandwidth Management	128
15.1 Overview	128
15.2 What You Can Do	128
15.3 What You Need To Know	129
15.4 General Configuration	129
15.5 Advanced Configuration	130
15.5.1 Priority Levels	132
15.5.2 User Defined Service Rule Configuration	133
15.5.3 Predefined Bandwidth Management Services	134
15.5.4 Services and Port Numbers	134
Remote Management	135
16.1 Overview	135
16.2 What You Can Do	135
16.3 What You Need To Know	135
16.3.1 Remote Management Limitations	136
16.3.2 Remote Management and NAT	136
16.3.3 System Timeout	136
16.4 WWW Screen	136
Universal Plug-and-Play (UPnP)	138
17.1 Overview	138
17.2 What You Can Do	138
17.3 What You Need to Know	138
17.4 UPnP Screen	139
17.5 Technical Reference	140
17.5.1 Using UPnP in Windows XP Example	140
17.5.2 Web Configurator Easy Access	142
System	145
18.1 Overview	145
18.2 What You Can Do	145
18.3 System General Screen	145
18.4 Time Setting Screen	147
Logs	149
19.1 Overview	149
19.2 What You Can Do	149
19.3 What You Need to Know	149
19.4 View Log Screen	149
Tools	151
20.1 Overview	151
20.2 What You Can Do	151
20.3 Firmware Upload Screen	151
20.4 Configuration Screen	153
20.4.1 Backup Configuration	153
20.4.2 Restore Configuration	153
20.4.3 Back to Factory Defaults	154
20.5 Restart Screen	155
Sys OP Mode	156
21.1 Overview	156
21.2 What You Can Do	156
21.3 What You Need to Know	156
21.4 General Screen	157
Language	159
22.1 Language Screen	159
Troubleshooting	161
23.1 Power, Hardware Connections, and LEDs	161
23.2 NBG-417N Access and Login	162
23.3 Internet Access	163
23.4 Resetting the NBG-417N to Its Factory Defaults	165
23.5 Wireless Router/AP Troubleshooting	165
Product Specifications	167
IP Addresses and Subnetting	171
Pop-up Windows, JavaScripts and Java Permissions	181
Setting Up Your Computer’s IP Address	193
Wireless LANs	221
Services	235
Legal Information	239

Match case Limit results 1 per page

Chapter 6 Wireless LAN

NBG-417N User’s Guide

6.7

Quality of Service (QoS) Screen

The QoS screen allows you to automatically give a service (such as e-mail, VoIP or FTP) a priority

level.

Fragmentation

Threshold

The threshold (number of bytes) for the fragmentation boundary for directed

messages. It is the maximum data fragment size that can be sent. Enter an even

number between

256

and

2346

This field is not available when

Super Mode

is selected.

Beacon

Interval

When a wirelessly networked device sends a beacon, it includes with it a beacon

interval. This specifies the time period before the device sends the beacon again.

The interval tells receiving devices on the network how long they can wait in low-

power mode before waking up to handle the beacon. This value can be set from

20ms to 1000ms. A high value helps save current consumption of the access point.

DTIM

Delivery Traffic Indication Message (DTIM) is the time period after which broadcast

and multicast packets are transmitted to mobile clients in the Active Power

Management mode. A high DTIM value can cause clients to lose connectivity with

the network. This value can be set from 1 to 100.

Preamble

A preamble affects the timing in your wireless network. There are two preamble

modes: long and short. If a device uses a different preamble mode than the NBG-

417N does, it cannot communicate with the NBG-417N.

CTS Protection

When set to

None

, the NBG-417N protects wireless communication against

interference.

When set to

Always

, the NBG-417N improves performance within mixed wireless

modes.

Select

Auto

to let the NBG-417N determine whether to turn this feature on or off in

the current environment.

Tx Power

This field controls the transmission power of the NBG-417N. When using the NBG-

417N with a notebook computer, select a lower transmission power level when you

are close to the AP in order to conserve battery power.

Enable Intra-

BSS Traffic

A Basic Service Set (BSS) exists when all communications between wireless clients

or between a wireless client and a wired network client go through one access point

(AP).

Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is

enabled, wireless client

and

can access the wired network and communicate

with each other. When Intra-BSS is disabled, wireless client

and

can still access

the wired network but cannot communicate with each other.

Apply

Click

Apply

to save your changes back to the NBG-417N.

Reset

Click

Reset

to reload the previous configuration for this screen.

Table 30

Network > Wireless LAN > Advanced

LABEL

DESCRIPTION