ZyXEL NBG-417N User Guide - Page 47
Configuring Your Settings, 4.4.1 LAN Settings, LAN Settings - firmware
View all ZyXEL NBG-417N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 4 AP Mode Table 21 Menu: AP Mode LINK TAB FUNCTION Maintenance System General Use this screen to view and change administrative settings such as system and domain names, password and inactivity timer. Time Setting Use this screen to change your NBG-417N's time and date. Logs View Log Use this screen to view the logs for the categories that you selected. Tools Firmware Use this screen to upload firmware to your NBG-417N. Configuration Use this screen to backup and restore the configuration or reset the factory defaults to your NBG-417N. Restart This screen allows you to reboot the NBG-417N without turning the power off. Sys OP Mode General This screen allows you to select whether your device acts as a Router or a Access Point. Language This screen allows you to select the language you prefer. 4.4 Configuring Your Settings Use this section to configure your NBG-417N settings while in AP Mode. 4.4.1 LAN Settings Click Network > LAN to see the screen below. Note: If you change the IP address of the NBG-417N in the screen below, you will need to log into the NBG-417N again using the new IP address. Figure 28 Network > LAN > IP The table below describes the labels in the screen. Table 22 Network > LAN > IP LABEL Get from DHCP Server User Defined LAN IP IP Address DESCRIPTION Select this to let the DHCP server in the gateway assign the NBG-417N IP address. Select this to give the NBG-417N a static IP address. Type the IP address in dotted decimal notatiion. The default setting is 192.168.1.2. If you change the IP address you will have to log in again with the new IP address. NBG-417N User's Guide 47