ZyXEL VSG1432-B101 User Guide - Page 103
MAC Authentication
View all ZyXEL VSG1432-B101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Chapter 7 Wireless Table 15 More AP: Edit LABEL DESCRIPTION Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. Client Isolation Select this to keep the wireless clients in this SSID from communicating with each other. MBSSID/LAN Isolation Select this to keep the wireless clients in this SSID from communicating with clients in other SSIDs or LAN devices. Enhanced Multicast Select this check box to allow the ZyXEL Device to convert wireless Forwarding multicast traffic into wireless unicast traffic. Security Level Security Mode Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as the ZyXEL Device. After you select to use a security, additional options appears in this screen. Or you can select No Security to allow any client to associate this network without any data encryption or authentication. Apply Cancel See Section 7.2.1 on page 95 for more details about this field. Click Apply to save your changes. Click Cancel to exit this screen without saving. 7.4 MAC Authentication This screen allows you to configure the ZyXEL Device to give exclusive access to specific devices (Allow) or exclude specific devices from accessing the ZyXEL Device (Deny). Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC addresses of the devices to configure this screen. VSG1432-B101 Series User's Guide 103