ZyXEL VSG1432-B101 User Guide - Page 57
Network Settings > NAT > Add new rule, Apply
View all ZyXEL VSG1432-B101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Chapter 4 Tutorials the ZyXEL Device. Traffic should be forwarded to the port 666 of the Doom server computer which has an IP address of 192.168.1.34. Tutorial: NAT Port Forwarding Setup D=192.168.1.34 LAN port 666 WAN A Thomas may set up the port settings by configuring the port settings for the Doom server computer (see Section 12.2 on page 176 for more information). 1 Click Network Settings > NAT > Add new rule and configure the screen with the following values: Service Name WAN Interface External Port/s Server IP Address Protocol Doom_Server Select the WAN interface through which the Doom service is forwarded. This example uses MyDSLConnection. Enter 666 as the Start and End port. Enter the IP address of the Doom server. This is 192.168.1.34 for this example. Select TCP/UDP. This should be the protocol supported by the Doom server. 2 The screen should look as follows. Click Apply. VSG1432-B101 Series User's Guide 57