ZyXEL VSG1432-B101 User Guide - Page 110
The Others Screen
View all ZyXEL VSG1432-B101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Chapter 7 Wireless 7.8 The Others Screen Use this screen to configure advanced wireless settings. Click Network Settings > Wireless > Others. The screen appears as shown. See Section 7.9.2 on page 113 for detailed definitions of the terms listed in this screen. Figure 35 Network Settings > Wireless > Others The following table describes the labels in this screen. Table 21 Network Settings > Wireless > Others LABEL DESCRIPTION RTS/CTS Threshold Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS (Clear To Send) handshake. Enter a value between 0 and 2347. Fragmentation This is the maximum data fragment size that can be sent. Enter a value Threshold between 256 and 2346. Auto Channel Timer If you set the channel to Auto in the Network Settings > Wireless > General screen, specify the interval in minutes for how often the ZyXEL Device scans for the best channel. Enter 0 to disable the periodical scan. Output Power Set the output power of the ZyXEL Device. If there is a high density of APs in an area, decrease the output power to reduce interference with other APs. Select one of the following: 20%, 40%, 60%, 80% or 100%. Beacon Interval When a wirelessly networked device sends a beacon, it includes with it a beacon interval. This specifies the time period before the device sends the beacon again. The interval tells receiving devices on the network how long they can wait in low power mode before waking up to handle the beacon. This value can be set from20ms to 1000ms. A high value helps save current consumption of the access point. 110 VSG1432-B101 Series User's Guide