ZyXEL VSG1432-B101 User Guide - Page 83
Bridge
View all ZyXEL VSG1432-B101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter 6 Broadband Table 7 Broadband: Add/Edit: Routing Mode LABEL DESCRIPTION DNS Select Dynamic if you want the ZyXEL Device use the DNS server addresses assigned by your ISP. Select Static if you want the ZyXEL Device use the DNS server addresses you configure manually. DNS Server 1 Enter the first DNS server address assigned by the ISP. DNS Server 2 Enter the second DNS server address assigned by the ISP. VLAN (These fields appear when the Type is set to VDSL or Ethernet) Active Select this option to add the VLAN tag (specified below) to the outgoing traffic through this connection. 802.1P IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer frame that contains bits to define class of service. 802.1Q Apply Cancel Select the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection. The greater the number, the higher the priority level. Type the VLAN ID number (from 1 to 4094) for traffic through this connection. Click Apply to save your changes back to the ZyXEL Device. Click Cancel to exit this screen without saving. 6.2.2.1 Bridge This screen displays when you select the Bridge mode. Figure 21 Broadband: Add/Edit: Bridge Mode VSG1432-B101 Series User's Guide 83