ZyXEL VSG1432-B101 User Guide - Page 219
Add a Protocol
View all ZyXEL VSG1432-B101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
Chapter 16 Firewall 16.3.1 Add a Protocol Use this screen to add a customized service rule that you can use in the firewall's ACL rule configuration. Click Add New Protocol Entry in the Protocol screen to display the following screen. Figure 94 Security Settings > Firewall > Protocol > Add The following table describes the labels in this screen. Table 67 Security Settings > Firewall > Protocol > Add LABEL DESCRIPTION Add Protocol Protocol Choose the IP protocol (TCP, UDP, ICMP, or Other) that defines your customized port from the drop-down list box. Select Other to be able to enter a protocol number. Source/ Destination Port These fields are displayed if you select TCP or UDP as the IP port. Select Single to specify one port only or Range to specify a span of ports that define your customized service. If you select Any, the service is applied to all ports. Protocol Number Add Rule List Protocol Type a single port number or the range of port numbers that define your customized service. This field is displayed if you select Other as the protocol. Enter the protocol number of your customized port. Click this to add the protocol to the Rule List below. This is the IP port (TCP, UDP, ICMP, or Other) that defines your customized port. VSG1432-B101 Series User's Guide 219