ZyXEL VSG1432-B101 User Guide - Page 105
The WPS Screen
View all ZyXEL VSG1432-B101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Chapter 7 Wireless 7.5 The WPS Screen Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device. WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Set up each WPS connection between two devices. Both devices must support WPS. See Section 7.9.9.3 on page 122 for more information about WPS. Note: The ZyXEL Device applies the security settings of the SSID1 profile (see Section 7.2 on page 92). If you want to use the WPS feature, make sure you have set the security mode of SSID1 to WPA-PSK, WPA2-PSK or No Security. Click Network Settings > Wireless > WPS. The following screen displays. Select Enable and click Apply to activate the WPS function. Then you can configure the WPS settings in this screen. Figure 31 Network Settings > Wireless > WPS The following table describes the labels in this screen. Table 17 Network Settings > Wireless > WPS LABEL DESCRIPTION Enable WPS Select Enable to activate WPS on the ZyXEL Device. Method 1 Use this section to set up a WPS wireless network using Push Button Configuration (PBC). VSG1432-B101 Series User's Guide 105