ZyXEL VSG1432-B101 User Guide - Page 95
Table 9
View all ZyXEL VSG1432-B101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Chapter 7 Wireless Table 9 Network Settings > Wireless > General LABEL DESCRIPTION MBSSID/LAN Select this to keep the wireless clients in this SSID from communicating Isolation with clients in other SSIDs or wired LAN devices through the ZyXEL Device. Select both Client Isolation and MBSSID/LAN Isolation to allow this SSID's wireless clients to only connect to the Internet through the ZyXEL Device. Enhanced Multicast Forwarding Select this check box to allow the ZyXEL Device to convert wireless multicast traffic into wireless unicast traffic. Security Level Security Mode Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as the ZyXEL Device. When you select to use a security, additional options appears in this screen. Or you can select No Security to allow any client to associate this network without any data encryption or authentication. Apply Cancel See the following sections for more details about this field. Click Apply to save your changes. Click Cancel to restore your previously saved settings. 7.2.1 No Security Select No Security to allow wireless stations to communicate with the access points without any data encryption or authentication. Note: If you do not enable any wireless security on your ZyXEL Device, your network is accessible to any wireless networking device that is within range. Figure 24 Wireless > General: No Security VSG1432-B101 Series User's Guide 95