ZyXEL VSG1432-B101 User Guide - Page 44
Active, General, ATM PVC Configuration, Encapsulation, PPPoE, Static, 168.5.2, 168.5.1 - bridge mode
View all ZyXEL VSG1432-B101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter 4 Tutorials 2 In this example, the DSL connection has the following information. General Connection Name MyDSLConnection Type ADSL Connection Mode Routing Encapsulation PPPoE ATM PVC Configuration VPI/VCI 36/48 Encapsulation Mode LLC/SNAP-Bridging Service Category UBR without PCR Account Information PPP User Name [email protected] PPP Password ABCDEF! PPPoE Service Name My DSL Static IP Address 192.168.1.32 Others PPPoE Passthrough: Disabled NAT: Enabled IGMP Multicast Proxy: Enabled Apply as Default Gateway: Enabled 3 Select the Active check box. Enter the General and ATM PVC Configuration settings as provided above. Set the Type to ADSL. Choose the Encapsulation specified by your DSL service provider. For this example, the service provider requires a username and password to establish Internet connection. Therefore, select PPPoE as the WAN encapsulation type. 4 Enter the account information provided to you by your DSL service provider. 5 Configure this rule as your default Internet connection by selecting the Apply as Default Gateway check box. Then select DNS as Static and enter the DNS server addresses provided to you, such as 192.168.5.2 (DNS server1)/192.168.5.1 (DNS server2). 44 VSG1432-B101 Series User's Guide