ZyXEL VSG1432-B101 User Guide - Page 288
Table 105
View all ZyXEL VSG1432-B101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 288 highlights
Chapter 28 Remote Management Click Maintenance > Remote Management > TR-069 Client to open the following screen. Use this screen to configure your ZyXEL Device to be managed by an ACS. Figure 134 Maintenance > Remote Management > TR-069 Client The following table describes the fields in this screen. Table 105 Maintenance > Remote Management > TR-069 Client LABEL DESCRIPTION Inform Select Enable for the ZyXEL Device to send periodic inform via TR-069 on the WAN. Otherwise, select Disable. Inform Interval Enter the time interval (in seconds) at which the ZyXEL Device sends information to the auto-configuration server. ACS URL Enter the URL or IP address of the auto-configuration server. ACS User Name Enter the TR-069 user name for authentication with the autoconfiguration server. ACS Password Enter the TR-069 password for authentication with the autoconfiguration server. WAN Interface used by TR-069 client Select a WAN interface through which the TR-069 traffic passes. If you select Any_WAN, you should also select the pre-configured WAN connection(s). Display SOAP messages on serial console Select Enable to show the SOAP messages on the console. Connection Request Authentication Select this option to enable authentication when there is a connection request from the ACS. Connection Request User Name Enter the connection request user name. When the ACS makes a connection request to the ZyXEL Device, this user name is used to authenticate the ACS. 288 VSG1432-B101 Series User's Guide