1996 Chevrolet Monte Carlo Owner's Manual - Page 242
1996 Chevrolet Monte Carlo Manual
Page 242 highlights
2. Turn the socket counterclockwiseuntil it stops and pull the bulb and socket out of the assembly. 3. Push in the bulb, turn it counterclockwiseand pull it out of the socket. TaiVStop/Turn Signal Lamp 1. Open the trunk. Remove the convenience net if you have one. Unhook the net from the upper wing nut. 4. Push the new bulb into the socket and turn it clockwise. 5. Replace the bulb and socket in the assembly. 2. Remove the upper (convenience net) wing nut, if equipped. 3. Pull the carpet away from the rear of the vehicle. Center High-Moun.kd.Stoplamp (Spoiler-Mounted) 1. Remove the two screws from the stoplamp assembly. 2. Pull the assembly forward out of the spoiler. 3. Remove the three screws from the back of the stoplamp assembly. 4. Pull the lamp strip out of the stoplamp assembly. 5 . Remove the bulb. 4. Unscrew the two remaining wing nuts. 5 . Pull the assembly from the body carefully. 6. Install the new bulb and reverse Steps 1-4. 6-34